CDB5364 Cirrus Logic Inc, CDB5364 Datasheet - Page 20

• Manufacturer Part Number: CDB5364
• Description: EVALUATION BOARD FOR CS5364
• Manufacturer: Cirrus Logic Inc

Specifications of CDB5364

• Number Of Adc's: 1
• Number Of Bits: 24
• Sampling Rate (per Second): 192k
• Data Interface: I²C, SPI™
• Inputs Per Adc: 4 Differential
• Power (typ) @ Conditions: 365mW @ 192kSPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5364
• Description/function: Audio A/D
• Operating Supply Voltage: 3.3 V
• Product: Audio Modules
• For Use With/related Products: CS5364
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

20
4.3
4.3.1 On-Chip Crystal Oscillator Driver
4.3.2 Externally Generated Master Clock
Master Clock Source
The CS5364 requires a Master Clock that can come from one of two sources: an on-chip crystal oscillator
driver or an externally generated clock.
When using the on-board crystal oscillator driver, the XTI pin (pin 21) is the input for the Master Clock
(MCLK) to the device. The XTO pin (pin 22) must not be used to drive anything other than the oscillator
tank circuitry. When using the on-board crystal driver, the topology shown in
crystal oscillator manufacturer supplies recommended capacitor values. A buffered copy of the XTI input is
available as an output on the MCLK pin (pin 23), which is level-controlled by VLS and may be used to syn-
chronize other parts to the device.
If an external clock is used, the XTI and XTO pins must be grounded, and the MCLK pin becomes an input
for the system master clock. The incoming MCLK should be at the logic level set by the user on the VLS
supply pin.
Figure 7. Crystal Oscillator Topology
XTO
XTI
21
22
Figure 7
must be used. The
CS5364
DS625F4