ATAVRTS2080A Atmel, ATAVRTS2080A Datasheet - Page 81

• Manufacturer Part Number: ATAVRTS2080A
• Description: KIT QTOUCH W/SW ATMEGA88
• Manufacturer: Atmel
• Series: QTouch™r

Specifications of ATAVRTS2080A

• Sensor Type: Touch, Capacitive
• Sensing Range: 1 Rotor, 1 Slider, and 2 Buttons/Keys
• Interface: Application Programming Interface (API)
• Voltage - Supply: 1.8 V ~ 5.5 V
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ATmega88
• Tool Type: Development Kit
• Cpu Core: AVR 8 / 32
• Data Bus Width: 8 bit
• Core Architecture: AVR
• Silicon Manufacturer: Atmel
• Silicon Core Number: ATmega88, ATmega88A
• Silicon Family Name: AVR
• Kit Contents: Board, CD
• Development Tool Type: Hardware / Software - Eval/Demo Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensitivity: -
• Lead Free Status / Rohs Status: Details

The table below provides a few examples of the naming convention.
5.7.2.4
5.7.2.4.1
Refer to the Library_selection_guide.xls for the list of devices supported for QMatrix for this
release.
5.8 PIN Configuration for QTouch Libraries
5.8.1
Pin configurability for QTouch acquisition method is provided for 8Bit AVR’s. QTouch
acquisition method libraries can be used to configure SNS and SNSK on any pins of the
port. But few rules should be followed while assigning the SNS and SNSK on particular
pins. These rules are internal to the library. But QTouch Studio –Pin Configuration Wizard
can be used to assign SNS and SNSK on the pins and rules are internally taken care in the
QTouch Studio Pin Configuration Wizard.
By default, for 4 and 8 channel QTouch acquisition libraries, the channel numbering follows
the pin number of the port.
To use the pin configurability, enable the macro _STATIC_PORT_PIN_CONF_ in the
project options or define the macro in the touch_qt_config.h file.
To use the pin configurability feature, the SNS_array and SNSK_array masks are exported
for the user, which needs to be initialized. These SNS_array and SNSK_array masks can
be taken from the QTouch Studio Pin Configuration Wizard and can be copied at
appropriate place in the main.c file as explained in the example projects provided.
QTOUCH_STUDIO_MASKS macro is used for providing pin configurability feature for
QTouch Acquisition method libraries.
NRS
Example Library name
libavr51g2_8qm_4x_2y_krs_2rs.a
libavr25g1s1_16qm_8x_2y_k_0rs.r90
Pin Configuration for QTouch Acquisition Method
SNS_array and SNSK_array takes values that are supplied by the user in main.c files.
This will reduce the code memory foot print of the library.
QMatrix acquisition method library variants
Devices supported for QMatrix Acquisition
In case the macro QTOUCH_STUDIO_MASKS enabled in project space,
krs
0,1,2,4,8
Configuration supported
krs – library variant supports keys, Rotors and Sliders
Maximum number of rotor sliders that the library
supports.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Compiler tool chain : GCC
Device : ATMega164P
8 Channels
4 X lines
2 Y lines
Supports Keys, Rotors and Sliders ( krs )
2 Rotors and Sliders
Compiler tool chain : IAR
Device : ATTiny88
16 Channels
8 X lines
2 Y lines
Supports only keys ( k)
0 Rotors and Sliders
81