DEBUGADPTR1-USB Silicon Laboratories Inc, DEBUGADPTR1-USB Datasheet - Page 2

• Manufacturer Part Number: DEBUGADPTR1-USB
• Description: ADAPTER USB DEBUG FOR C8051FXXX
• Manufacturer: Silicon Laboratories Inc
• Series: ToolStickr
• Type: Debuggerr

Specifications of DEBUGADPTR1-USB

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Toolstick daughter card
• Contents: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1182

USB Debug Adapter
3. Hardware Setup using a USB Debug Adapter
Connect a target board to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown in
Figure 2.
Notes:
2
1. Connect the USB Debug Adapter to the JTAG or DEBUG connector on a target board with the 10-pin ribbon
2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter.
3. Connect the other end of the USB cable to a USB Port on the PC.
4. Connect the AC/DC power adapter to the power jack on the target board, or configure the board to receive
• Use the Reset button in the IDE to reset the target when connected using a USB Debug Adapter.
• Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the
• A USB cable is necessary when using the USB Debug Adapter. USB cables are included with the purchase
ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can
damage the device and/or the USB Debug Adapter.
of microcontroller development kits that include a USB Debug Adapter. However, a USB cable is not
included when purchasing the USB Debug Adapter separately.
cable.
power from the USB Debug Adapter (see Kit User’s Guide for configuration options).
PC
Figure 2. Hardware Setup using a USB Debug Adapter
Cable
USB
USB Debug Adapter
Rev. 0.1
Adapter
AC/DC
SILICON LABORATORIES
P1.6
Port 2
Port 1
PWR
Target Board
Port 0
Port 3
MCU
Port 4