E62140 Renesas Electronics America, E62140 Datasheet - Page 3

• Manufacturer Part Number: E62140
• Description: DEV EMULATOR BASE UNIT H8S/2100
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of E62140

• Contents: E6000 Emulator Unit and 4 Logic Probes
• For Use With/related Products: H8S/214x, 213x, 212x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1 Precautions on Using the Emulator
Thank you for purchasing the H8S/2140 E6000 emulator.
Please note the followings when using this version of the H8S/2140 E6000 emulator.
1.1 Devices that cannot be Emulated Independently by E6000
1.2 I/O Register
1.3 Change of Attribute in Emulation Area
1.4 Event
1.4.1
Emulation
Device
H8S/2140B
H8S/2141B
H8S/2145BV
H8S/2160B
H8S/2161B
H8S/2149
H8S/2169
H8/3567U,
H8/3564U
Note: 'O' means the emulator is available, and 'X' means unavailable.
When the following devices are emulated, an expansion board and a user cable are required besides the
E6000 station. Therefore, do not select the corresponding devices when the following expansion boards
and user cables are disconnected.
When Custom is selected in Device, I/O registers that have been enabled by Modules are shown in the
[IO] window without conditions.
When the E6000 H8/3577 Emulator platform is selected and Custom is selected as an emulation device,
the LPWRCR register is displayed on the [Power_Down_Mode_Registers] item in the [IO] window.
However, do not this register because it is not used for the H8/35xx group.
In H8/3577, H8/3574, H8/3567, or H8/3564 emulation, H'F000 to H'FE4F is the reserved area. In
H8/3567U or H8/3564U emulation, H'F000 to H'F7FF is the reserved area.
Do not change the attributes in these areas from 'User Guarded'.
In H8S series emulation, when the following areas have been described as reserved in the hardware
manual for each MCU, do not change the attributes in the target areas from 'User Guarded'.
When an address range is set as the address condition and byte data as the data condition, a break will
occur only at even addresses in the address range. When an address range is set as the address condition,
do not set an odd address as the Address Lo condition. Otherwise, a break will not occur even when the
conditions are satisfied.
Reserved Area
H’F800 to H’FE4F
H’FFF800 to H’FFFE4F
Precautions on Using the H8S/2140 E6000 Emulator
Combination of Address-Range and Data Compare-Byte
Expansion Board and User Cable
Product Name
H8S/2140B group E6000
expansion I/O board
H8S/2160B group E6000
expansion I/O board
H8S/2149 E6000 expansion
I/O board
H8S/2169 E6000 expansion
I/O board
H8/3567U group user
system interface cables
1 / 6
Type Name
HS2140EIO61H
HS2160EIO61H
HS2149EIO61H
HS2169EIO61H
HS3567UECH61H or
HS3567UECS61H
Notes
Mode 1 or mode 3 is in use
Mode 2 is in use
E6000 Type Name
HS2140EPI61H
O
O
X
X
O
HS2140EPI61HE-P(E)
HS2148EPI61H
X
X
O
O
O