NRH3012T100MN Taiyo Yuden, NRH3012T100MN Datasheet - Page 20

• Manufacturer Part Number: NRH3012T100MN
• Description: INDUCTOR 10UH .72A 20% SMD
• Manufacturer: Taiyo Yuden
• Series: NRHr

Specifications of NRH3012T100MN

• Inductance: 10µH
• Current: 720mA
• Current - Saturation: 730mA
• Current - Temperature Rise: 720mA
• Tolerance: ±20%
• Shielding: Unshielded
• Dc Resistance (dcr): 324 mOhm Max
• Self Resonant Freq: 32MHz
• Package / Case: 0.118" L x 0.118" W x 0.047" H (3.00mm x 3.00mm x 1.20mm)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 120°C
• Frequency - Test: 100kHz
• Applications: Power Supplies
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Q @ Freq: -
• Other names: 587-2584-2

【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
wound0103_reli_e-01
20.High temperature life test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
21.Loading at high temperature life test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
22.Low temperature life test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
23.Standard condition
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
Temperature：85±2℃
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
Temperature：85±2℃
Duration：1000 hrs
Applied current：Rated current
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
Temperature：－40±2℃
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Inductance change:Within±10％
Inductance change :Within±10％
Q→ R12～4R7：30 min.
Inductance change:Within±10％
Inductance change:Within±10％
Inductance change :Within±10％
Q→ R12～4R7：30 min.
Standard test conditions
Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65±
20％. If there is any doubt about the test results, further measurement shall be had
within the following limits:
Inductance value is based on our standard measurement systems.
Ambient Temperature: 20±2℃
Relative humidity: 65±5％
5R6～330：25 min.
390～820：20 min.
101：15 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
1 1
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
wound0103_reli-PRP5