PIC24HJ12GP201-I/SO Microchip Technology, PIC24HJ12GP201-I/SO Datasheet - Page 229

• Manufacturer Part Number: PIC24HJ12GP201-I/SO
• Description: IC PIC MCU FLASH 4KX24 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ12GP201-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 12KB (4K x 24)
• Package / Case: 18-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 6-ch x 10-bit or 6-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164339 - MODULE SKT FOR PM3 28SOIC
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE 23-1:
© 2009 Microchip Technology Inc.
Section 14.0 “Serial
Peripheral Interface (SPI)”
Section 15.0 “Inter-Integrated
Circuit™ (I
Section 16.0 “Universal
Asynchronous Receiver
Transmitter (UART)”
Section Name
2
C)”
MAJOR SECTION UPDATES
Removed the following sections, which are now available in the related section of
the “PIC24H Family Reference Manual”:
• 14.1 “Interrupts”
• 14.2 “Receive Operations”
• 14.3 “Transmit Operations”
• 14.4 “SPI Setup” (retained Figure 14-1: SPI Module Block Diagram)
Removed the following sections, which are now available in the related section of
the “PIC24H Family Reference Manual”:
• 15.3 “I
• 15.4 “Baud Rate Generator” (retained Figure 15-1: I
• 15.5 “I
• 15.6 “Slave Address Masking”
• 15.7 “IPMI Support”
• 15.8 “General Call Address Support”
• 15.9 “Automatic Clock Stretch”
• 15.10 “Software Controlled Clock Stretching (STREN = 1)”
• 15.11 “Slope Control”
• 15.12 “Clock Arbitration”
• 15.13 “Multi-Master Communication, Bus Collision, and Bus Arbitration
• 15.14 “Peripheral Pin Select Limitations
Removed the following sections, which are now available in the related section of
the “PIC24H Family Reference Manual”:
• 16.1 “UART Baud Rate Generator”
• 16.2 “Transmitting in 8-bit Data Mode
• 16.3 “Transmitting in 9-bit Data Mode
• 16.4 “Break and Sync Transmit Sequence”
• 16.5 “Receiving in 8-bit or 9-bit Data Mode”
• 16.6 “Flow Control Using UxCTS and UxRTS Pins”
• 16.7 “Infrared Support”
Removed IrDA references and Note 1, and updated the bit and bit value
descriptions for UTXINV (UxSTA<14>) in the UARTx Status and Control Register
(see Register 16-2).
2
2
C Interrupts”
C Module Addresses
Preliminary
PIC24HJ12GP201/202
Update Description
2
C Block Diagram)
DS70282D-page 227