PIC18F67J10-I/PT Microchip Technology, PIC18F67J10-I/PT Datasheet - Page 6

• Manufacturer Part Number: PIC18F67J10-I/PT
• Description: IC PIC MCU FLASH 64KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F67J10-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 50
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3936 B
• Interface Type: SPI/I2C/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F87J10 FAMILY
16. Module: 10-Bit Analog-to-Digital (A/D)
17. Module: Master Synchronous Serial Port
18. Module: I/O Ports
DS80340B-page 6
When F
clock, A/D conversion will not be performed.
Work around
None.
Date Codes that pertain to this issue:
All engineering and production devices.
In extremely rare cases, when configured for I
slave reception, the MSSP module may not
receive the correct data. This occurs only if the
Serial
(SSPxBUF) is not read within a window after the
SSPxIF interrupt has occurred.
Work around
The issue can be resolved in either of these ways:
• Prior to the I
• Each time the SSPxIF is set, read the
During a Power-on Reset, the PORTJ pins will not
behave as high-impedance pins.
For the Power-up Timer period (approximately
65.6 ms), PORTJ pins may be driven high or low.
Work around
None.
clock stretching feature. This is done by setting
the SEN bit (SSPxCON2<0>).
SSPxBUF before the first rising clock edge of
the next byte being received.
OSC
Receive/Transmit
Converter
(MSSP)
/8 is selected as the A/D conversion
2
C slave reception, enable the
Buffer
Register
2
C
 2010 Microchip Technology Inc.