P89LPC932A1FDH,512 NXP Semiconductors, P89LPC932A1FDH,512 Datasheet - Page 47

• Manufacturer Part Number: P89LPC932A1FDH,512
• Description: IC 80C51 MCU FLASH 8K 28-TSSOP
• Manufacturer: NXP Semiconductors
• Series: LPC900r

Specifications of P89LPC932A1FDH,512

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 28-TSSOP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 18MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 26
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: P89LPC9x
• Core: 80C51
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 18 MHz
• Number Of Programmable I/os: 26
• Number Of Timers: 2
• Operating Supply Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Cpu Family: 89LP
• Device Core: 80C51
• Device Core Size: 8b
• Frequency (max): 18MHz
• Total Internal Ram Size: 768Byte
• # I/os (max): 26
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 2.4V
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Package Type: TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: OM6292 - DEMO BOARD PCA2125 RTCDB-TSSOP-LPC932 - BOARD FOR LPC932 TSSOP622-1014 - BOARD FOR LPC9XX TSSOP622-1008 - BOARD FOR LPC9103 10-HVSON622-1006 - SOCKET ADAPTER BOARDMCB900K - BOARD PROTOTYPE NXP 89LPC9EPM900K - EMULATOR/PROGRAMMER NXP P89LPC9568-4000 - DEMO BOARD SPI/I2C TO DUAL UART568-3510 - DEMO BOARD SPI/I2C TO UART622-1003 - KIT FOR LCD DEMO622-1002 - USB IN-CIRCUIT PROG LPC9XX568-1759 - EMULATOR DEBUGGER/PROGRMMR LPC9X568-1758 - BOARD EVAL FOR LPC93X MCU FAMILY
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4515-5; 935276132512; P89LPC932A1FDH; P89LPC932A1FDH

NXP Semiconductors
Table 8.
V
T
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
P89LPC932A1_3
Product data sheet
Symbol
I
R
V
V
TC
TL
amb
DD
bo
ref(bg)
RST(int)
bg
= 2.4 V to 3.6 V unless otherwise specified.
Typical ratings are not guaranteed. The values listed are at room temperature, 3 V.
The I
real-time clock, and watchdog timer.
The I
brownout detect, and watchdog timer.
See
V
This specification can be applied to pins which have analog comparator input functions when the pin is not being used for those analog
functions. When the pin is being used as an analog input pin, the maximum voltage on the pin must be limited to 4.0 V with respect to
V
Pin capacitance is characterized but not tested.
Measured with port in quasi-bidirectional mode.
Measured with port in high-impedance mode.
Port pins source a transition current when used in quasi-bidirectional mode and externally driven from logic 1 to logic 0. This current is
highest when V
= 40 C to +85 C for industrial applications, unless otherwise specified.
OL
SS
/V
.
Section 8 “Limiting values” on page 45
DD(oper)
DD(tpd)
OH
Static characteristics
Parameter
logical 1-to-0 transition current,
all ports
internal pull-up resistance on pin
RST
brownout trip voltage
band gap reference voltage
band gap temperature
coefficient
may exceed the related specification.
specification is measured using an external clock with the following functions disabled: comparators, real-time clock,
, I
DD(idle)
I
is approximately 2 V.
, and I
DD(pd)
specifications are measured using an external clock with the following functions disabled: comparators,
…continued
for steady state (non-transient) limits on I
Conditions
V
2.4 V < V
BOV = 1, BOPD = 0
I
= 1.5 V at V
Rev. 03 — 12 March 2007
8-bit microcontroller with accelerated two-clock 80C51 core
DD
< 3.6 V; with
DD
= 3.6 V
[9]
Min
10
2.40
1.19
-
30
OL
or I
OH
. If I
P89LPC932A1
OL
Typ
-
-
-
1.23
10
/I
OH
[1]
exceeds the test condition,
© NXP B.V. 2007. All rights reserved.
Max
30
2.70
1.27
20
450
Unit
k
V
V
ppm/ C
A
47 of 64