LPC2114FBD64/01,15 NXP Semiconductors, LPC2114FBD64/01,15 Datasheet - Page 9

• Manufacturer Part Number: LPC2114FBD64/01,15
• Description: IC ARM7 MCU FLASH 128K 64-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2100r

Specifications of LPC2114FBD64/01,15

• Program Memory Type: FLASH
• Program Memory Size: 128KB (128K x 8)
• Package / Case: 64-LQFP
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: I²C, Microwire, SPI, SSI, SSP, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 46
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC21
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/JTAG/SPI/SSP/UART
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 46
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 10-bit
• Package: 64LQFP
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 60 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4310 - EVAL BOARD LPC2158 W/LCD568-4297 - BOARD EVAL LPC21XX MCB2100MCB2100 - BOARD EVAL NXP LPC211X/LPC212X622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4312; 935284885151; LPC2114FBD64/01-S; LPC2114FBD64/01-S

NXP Semiconductors
Table 3.
[1]
LPC2114_2124_6
Product data sheet
Symbol
V
V
V
DDA(1V8)
DD(3V3)
DDA(3V3)
SSP interface available on LPC2114/01 and LPC2124/01 only.
Pin description
Pin
63
23, 43, 51
7
…continued
Type Description
I
I
I
analog 1.8 V core power supply; this is the power supply voltage for internal
circuitry. This should be nominally the same voltage as V
isolated to minimize noise and error.
3.3 V pad power supply; this is the power supply voltage for the I/O ports
analog 3.3 V pad power supply; this should be nominally the same voltage as
V
DD(3V3)
Rev. 06 — 10 December 2007
but should be isolated to minimize noise and error
Single-chip 16/32-bit microcontrollers
LPC2114/2124
DD(1V8)
© NXP B.V. 2007. All rights reserved.
but should be
9 of 40