SAF-XC866-2FRI BC Infineon Technologies, SAF-XC866-2FRI BC Datasheet - Page 2

• Manufacturer Part Number: SAF-XC866-2FRI BC
• Description: IC MCU 8BIT 8KB FLASH TSSOP-38
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAF-XC866-2FRI BC

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 38-TSSOP
• For Use With: MCBXC866 - BOARD EVAL FOR INFINEON XC86X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: FX8662FRIBCXT; SAF-XC866-2FRIBC; SAF-XC866-2FRIBCINTR; SAF-XC866-2FRIBCTR; SAF-XC866-2FRIBCTR; SAFXC8662FRIBCXT; SP000210683

Edition 2007-10
Published by Infineon Technologies AG,
81726 München, Germany
©
Infineon Technologies AG 2007.
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values
stated herein and/or any information regarding the application of the device, Infineon Technologies hereby
disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-
infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.