PIC16F785-I/SO Microchip Technology, PIC16F785-I/SO Datasheet - Page 32

• Manufacturer Part Number: PIC16F785-I/SO
• Description: IC PIC MCU FLASH 2KX14 20SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F785-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 3.5KB (2K x 14)
• Package / Case: 20-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: RS- 232/USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120, DM163029
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SO1-1 - SOCKET TRANS ICE 20DIP TO 20SOICXLT18SO-1 - SOCKET TRANSITION 18SOIC 300MILAC162060 - HEADER INTRFC MPLAB ICD2 20PINAC164039 - MODULE SKT PROMATE II 20DIP/SOIC
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC16F785/HV785
3.5
The system clock source can be switched between
external and internal clock sources via software using
the System Clock Select (SCS) bit.
3.5.1
The System Clock Select (SCS) bit, in the OSCCON
Register, selects the system clock source that is used
for the CPU and peripherals.
• When SCS = 0, the system clock source is deter-
• When SCS = 1, the system clock source is cho-
3.5.2
The Oscillator Start-up Time-out Status (OSTS) bit,
(OSCCON<3>), indicates whether the system clock is
running from the external clock source as defined by
the FOSC bits, or from internal clock source. In partic-
ular, OSTS indicates that the Oscillator Start-up Timer
(OST) has timed out for LP, XT or HS modes.
3.6
Two-Speed Start-up mode provides additional power
savings by minimizing the latency between external
oscillator start-up and code execution. In applications
that make heavy use of the Sleep mode, Two-Speed
Start-up will remove the external oscillator start-up time
from the time spent awake and can reduce the overall
power consumption of the device.
This mode allows the application to wake-up from
Sleep, perform a few instructions using the INTOSC as
the clock source and go back to Sleep without waiting
for the primary oscillator to become stable.
DS41249E-page 30
mined by configuration of the FOSC<2:0> bits in
Configuration Word (CONFIG).
sen by the internal oscillator frequency selected
by the IRCF bits. After a Reset, SCS is always
cleared.
Note:
Note:
Clock Switching
Two-Speed Clock Start-up Mode
SYSTEM CLOCK SELECT (SCS) BIT
Any automatic clock switch, which may
occur
Fail-Safe Clock Monitor, does not update
the SCS bit. The user can monitor the
OSTS (OSCCON<3>) to determine the
current system clock source.
OSCILLATOR START-UP TIME-OUT
STATUS BIT
Executing a SLEEP instruction will abort
the Oscillator Start-up Time and will cause
the OSTS bit in the OSCCON Register to
remain clear.
from
Two-Speed
Start-up
or
When the PIC16F785/HV785 is configured for LP, XT
or HS modes, the Oscillator Start-up Timer (OST) is
enabled (see Section 3.3.1 “Oscillator Start-up
Timer (OST)”). The OST timer will suspend program
execution until 1024 oscillations are counted. Two-
Speed Start-up mode minimizes the delay in code exe-
cution by operating from the internal oscillator as the
OST is counting. When the OST count reaches 1024
and the OSTS bit in the OSCCON Register is set, pro-
gram execution switches to the external oscillator.
3.6.1
Two-Speed Start-up mode is configured by the follow-
ing settings:
• IESO = 1 (CONFIG<10>) Internal/External Switch
• SCS = 0.
• F
Two-Speed Start-up mode is entered after:
• Power-on Reset (POR) and, if enabled, after
• Wake-up from Sleep.
If the external clock oscillator is configured to be any-
thing other than LP, XT or HS mode, then Two-Speed
Start-up is disabled. This is because the external clock
oscillator does not require any stabilization time after
POR or an exit from Sleep.
3.6.2
1.
2.
3.
4.
5.
6.
7.
3.6.3
Checking the state of the OSTS bit in the OSCCON
Register) will confirm if the PIC16F785/HV785 is run-
ning from the external clock source as defined by the
F
internal oscillator.
OSC
Over bit.
PWRT has expired, or
OSC
Wake-up from Power-on Reset or Sleep.
Instructions begin execution by the internal
oscillator at the frequency set in the IRCF bits (in
the OSCCON Register.
OST enabled to count 1024 clock cycles.
OST timed out, wait for falling edge of the inter-
nal oscillator.
OSTS is set.
System clock held low until the next falling edge
of new clock (LP, XT or HS mode).
System clock is switched to external clock
source.
bits in the Configuration Word (CONFIG) or the
configured for LP, XT or HS mode.
TWO-SPEED START-UP MODE
CONFIGURATION
TWO-SPEED START-UP
SEQUENCE
CHECKING EXTERNAL/INTERNAL
CLOCK STATUS
© 2008 Microchip Technology Inc.