PIC18F2420-I/SP Microchip Technology, PIC18F2420-I/SP Datasheet - Page 13

• Manufacturer Part Number: PIC18F2420-I/SP
• Description: IC MCU FLASH 8KX16 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2420-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 25
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI, I2C, USART
• Maximum Clock Frequency: 31 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM163014, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Data Rom Size: 256 KB
• Height: 3.3 mm
• Length: 34.67 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.2 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

44. Module: Master Synchronous Serial Port
© 2008 Microchip Technology Inc.
Operating
(SSPM3:SSPM0 = 0110), the MSSP module of
this silicon version may not send a NACK bit (ACK)
in response to receiving the slave address loaded
in SSPADD<7:1>.
The affected addresses are in the following
ranges:
• 0x00 to 0x07
• 0x78 to 0x7F (available when using 10-bit slave
These addresses are reserved, as specified in
“I
Revision 03, 19 June 2007. Section 3.12,
“Reserved Addresses”, defines the purposes of
these addresses.
The specification is available at:
Work around
Do either of the following:
• Change the 7-bit slave address in SSPADD to
• Use Revision B silicon
Date Codes that pertain to this issue:
All engineering and production devices.
http://www.semiconductors.philips.com/i2c.
2
addressing)
an address in the range of 0x08 to 0x77.
This version of silicon removes this issue’s
addressing restrictions.
C™ Bus Specification and User Manual”,
(MSSP) – I
in
7-bit
2
C Slave
I
2
C
Slave
PIC18F2420/2520/4420/4520
mode
DS80209H-page 13