PIC12CE519/JW Microchip Technology, PIC12CE519/JW Datasheet - Page 357

• Manufacturer Part Number: PIC12CE519/JW
• Description: IC MCU EPROM 1KX12 W/EE 8CDIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE519/JW

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.5KB (1K x 12)
• Program Memory Type: EPROM, UV
• Eeprom Size: 16 x 8
• Ram Size: 41 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-CDIP (0.300", 7.62mm) Window
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGDVA12XP080 - ADAPTER DEVICE FOR MPLAB-ICEAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Data Converters: -
• Connectivity: -

18.7
1997 Microchip Technology Inc.
Initialization
Example 18-2
Example 18-3
load into the SPBRG register is dependent on the desired baud rate and the device frequency.
Example 18-2:
Example 18-3:
BSF
MOVLW
MOVWF
MOVLW
MOVWF
BSF
BSF
BCF
MOVLW
MOVWF
BSF
MOVLW
MOVWF
MOVLW
MOVWF
BSF
BSF
BCF
MOVLW
MOVWF
STATUS,RP0
<baudrate>
SPBRG
0x40
TXSTA
PIE1,TXIE
PIE1,RCIE
STATUS,RP0
0x90
RCSTA
STATUS,RP0
<baudrate>
SPBRG
0xB0
TXSTA
PIE1,TXIE
PIE1,RCIE
STATUS,RP0
0x90
RCSTA
is for the synchronous mode. In both examples the data is 8-bits, and the value to
is an initialization routine for asynchronous Transmitter/Receiver mode.
Asynchronous Transmitter/Receiver
Synchronous Transmitter/Receiver
; Go to Bank1
; Set Baud rate
; 8-bit transmit, transmitter enabled,
; asynchronous mode, low speed mode
; Enable transmit interrupts
; Enable receive interrupts
; Go to Bank 0
; 8-bit receive, receiver enabled,
; serial port enabled
; Go to Bank 1
; Set Baud Rate
; Synchronous Master,8-bit transmit,
; transmitter enabled, low speed mode
; Enable transmit interrupts
; Enable receive interrupts
; Go to Bank 0
; 8-bit receive, receiver enabled,
; continuous receive, serial port enabled
Section 18. USART
DS31018A-page 18-21
18