Z86E3412SSG Zilog, Z86E3412SSG Datasheet - Page 65

• Manufacturer Part Number: Z86E3412SSG
• Description: IC MICROCONTROLLER 16K 28-SOIC
• Manufacturer: Zilog
• Series: Z8®r

Specifications of Z86E3412SSG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 12MHz
• Connectivity: EBI/EMI
• Peripherals: POR, WDT
• Number Of I /o: 24
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: OTP
• Ram Size: 237 x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: Z86E3xx
• Core: Z8
• Data Bus Width: 8 bit
• Data Ram Size: 237 B
• Maximum Clock Frequency: 12 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 2
• Operating Supply Voltage: 3.5 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z86E4400ZDV, Z86E4400ZDP, Z86E4400ZDF, Z86E3400ZDV, Z86E3400ZDS, Z86E3400ZDP
• Minimum Operating Temperature: 0 C
• For Use With: 309-1073 - ADAPTER 28-SOIC TO 28-SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4701-5; Z86E3412SSG

PS022901-0508
Table 22. Stop Mode Recovery Source
Stop Mode Recovery Delay Select (D5). The 5 ms RESET delay after Stop Mode Recov-
ery is disabled by programming this bit to a zero. A “1” in this bit will cause a 5 ms
RESET delay after Stop Mode Recovery. The default condition of this bit is 1. If the fast
wake up mode is selected, the Stop Mode Recovery source needs to be kept active for at
least 5TpC.
Stop Mode Recovery Level Select (D6). A “1” in this bit defines that a high level on any
one of the recovery sources wakes the MCU from STOP Mode. A 0 defines low level
recovery. The default value is 0.
Cold or Warm Start (D7). This bit is set by the device upon entering STOP Mode. A “0”
in this bit indicates that the device has been reset by POR (cold). A “1” in this bit indicates
the device was awakened by a SMR source (warm).
Stop Mode Recovery Register 2 (SMR2). This register contains additional Stop Mode
Recovery sources. When the Stop Mode Recovery sources are selected in this register then
SMR Register Bits D2, D3, and D4 must be 0.
Watchdog Timer Mode Register (WDTMR). The WDT is a retriggerable one-shot timer
that resets the Z8 if it reaches its terminal count. The WDT is disabled after Power-On
D4
0
0
0
0
1
1
1
1
D3
0
0
1
1
0
0
1
1
D1
0
0
1
SMR:10
D2
0
1
0
1
0
1
0
1
DO
0
1
0
SMR Source selection
POR recovery only
P30 transition
P31 transition (Not in analog mode)
P32 transition (Not in analog mode)
P33 transition (Not in analog mode)
P27 transition
Logical NOR of Port 2 bits 0-3
Logical NOR of Port 2 bits 0-7
POR and/or external reset recovery
Logical AND of P20 through P23
Logical AND of P20 through P27
Description of Action
Operation
CMOS Z8
®
Product Specification
OTP Microcontrollers
Electrical Characteristics
61