C8051F339-GM Silicon Laboratories Inc, C8051F339-GM Datasheet - Page 40

• Manufacturer Part Number: C8051F339-GM
• Description: IC MCU 16K FLASH 24QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F33xr

Specifications of C8051F339-GM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 24-QFN
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F336DK
• Minimum Operating Temperature: - 40 C
• Package: 24QFN EP
• Device Core: 8051
• Family Name: C8051F33x
• Maximum Speed: 25 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1426-5

C8051F336/7/8/9
7.2.3. Settling Time Requirements
A minimum tracking time is required before each conversion to ensure that an accurate conversion is per-
formed. This tracking time is determined by any series impedance, including the AMUX0 resistance, the
the ADC0 sampling capacitance, and the accuracy required for the conversion. Note that in low-power
tracking mode, three SAR clocks are used for tracking at the start of every conversion. For many applica-
tions, these three SAR clocks will meet the minimum tracking time requirements.
Figure 7.3 shows the equivalent ADC0 input circuits for both Differential and Single-ended modes. Notice
that the equivalent time constant for both input circuits is the same. The required ADC0 settling time for a
given settling accuracy (SA) may be approximated by Equation 7.1. When measuring the Temperature
Sensor output or V
teristics” on page 27
sampling capacitor values.
Where:
SA is the settling accuracy, given as a fraction of an LSB (for example, 0.25 to settle within 1/4 LSB)
t is the required settling time in seconds
R
n is the ADC resolution in bits (10).
40
TOTAL
is the sum of the AMUX0 resistance and any external source resistance.
Px.x
Px.x
RC
Differential Mode
MUX Select
MUX Select
Input
DD
= R
MUX
with respect to GND, R
Equation 7.1. ADC0 Settling Time Requirements
for ADC0 minimum settling time requirements as well as the mux impedance and
* C
R
R
Figure 7.3. ADC0 Equivalent Input Circuits
SAMPLE
MUX
MUX
t
=
ln
C
C
SAMPLE
SAMPLE
⎛
⎝
------ -
SA
2
n
TOTAL
⎞
⎠
×
R
Rev.1.0
TOTAL
reduces to R
C
Px.x
SAMPLE
MUX
Single-Ended Mode
RC
MUX Select
Input
. See
= R
MUX
Section “6. Electrical Charac-
* C
R
SAMPLE
MUX
C
SAMPLE