PIC16F716-E/SO Microchip Technology, PIC16F716-E/SO Datasheet - Page 43

• Manufacturer Part Number: PIC16F716-E/SO
• Description: IC PIC MCU FLASH 2KX14 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F716-E/SO

• Program Memory Type: FLASH
• Program Memory Size: 3.5KB (2K x 14)
• Package / Case: 18-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 13
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: RS- 232/USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 8-bit
• Data Rom Size: 128 B
• Height: 2.31 mm
• Length: 11.53 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 7.49 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: I3-DB16F716 - BOARD DAUGHTER ICEPIC3AC162054 - HEADER INTERFACE ICD2 16F716
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7.2.7
The following registers are used to control the
operation of the ADC.
REGISTER 7-1:
© 2007 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-3
bit 2
bit 1
bit 0
ADCS1
R/W-0
ADC REGISTER DEFINITIONS
ADCS<1:0>: A/D Conversion Clock Select bits
00 = F
01 = F
10 = F
11 = F
CHS<2:0>: Analog Channel Select bits
000 = AN0
001 = AN1
010 = AN2
011 = AN3
100 = Reserved, do not use
101 = Reserved, do not use
110 = Reserved, do not use
111 = Reserved, do not use
GO/DONE: A/D Conversion Status bit
1 = A/D conversion cycle in progress. Setting this bit starts an A/D conversion cycle.
0 = A/D conversion completed/not in progress
Unimplemented: Read as ‘0’
ADON: ADC Enable bit
1 = ADC is enabled
0 = ADC is disabled and consumes no operating current
ADCS0
R/W-0
This bit is automatically cleared by hardware when the A/D conversion has completed.
ADCON0: A/D CONTROL REGISTER 0
OSC
OSC
OSC
RC
(Clock derived from the internal ADC RC oscillator)
/2
/8
/32
W = Writable bit
‘1’ = Bit is set
R/W-0
CHS2
R/W-0
CHS1
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
CHS0
GO/DONE
R/W-0
x = Bit is unknown
PIC16F716
U-0
—
DS41206B-page 41
ADON
R/W-0
bit 0