PIC16LF723A-I/ML Microchip Technology, PIC16LF723A-I/ML Datasheet - Page 203

• Manufacturer Part Number: PIC16LF723A-I/ML
• Description: MCU PIC 3.5K FLASH XLP 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF723A-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16LF
• No. Of I/o's: 25
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

RETFIE
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
© 2008 Microchip Technology Inc.
Return from Interrupt
[ label ]
None
TOS → PC,
1 → GIE
None
Return from Interrupt. Stack is
POPed and Top-of-Stack (TOS) is
loaded in the PC. Interrupts are
enabled by setting Global
Interrupt Enable bit, GIE
(INTCON<7>). This is a two-cycle
instruction.
1
2
After Interrupt
RETFIE
PC =
GIE =
RETFIE
TOS
1
Preliminary
PIC16F72X/PIC16LF72X
RETLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
TABLE
RETURN
Syntax:
Operands:
Operation:
Status Affected:
Description:
Return from Subroutine
[ label ]
None
TOS → PC
None
Return from subroutine. The stack
is POPed and the top of the stack
(TOS) is loaded into the program
counter. This is a two-cycle
instruction.
Return with literal in W
[ label ]
0 ≤ k ≤ 255
k → (W);
TOS → PC
None
The W register is loaded with the
eight bit literal ‘k’. The program
counter is loaded from the top of
the stack (the return address).
This is a two-cycle instruction.
1
2
Before Instruction
After Instruction
CALL TABLE;W contains
table
•
•
•
ADDWF PC ;W = offset
RETLW k1 ;Begin table
RETLW k2 ;
•
•
•
RETLW kn ; End of table
;offset value
;W now has table value
W
W
RETURN
RETLW k
=
=
DS41341B-page 201
0x07
value of k8