PIC16LF1947-I/PT Microchip Technology, PIC16LF1947-I/PT Datasheet - Page 103

• Manufacturer Part Number: PIC16LF1947-I/PT
• Description: IC MCU 8BIT FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1947-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 28KB (16K x 14)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 54
• Eeprom Size: 256 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: EUSART/I2C/SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 54
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 17-ch x 10-bit
• A/d Bit Size: 10 bit
• A/d Channels Available: 17
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.0
The PIC16F1946/47 has an internal Low Dropout
Regulator (LDO) which provides operation above 3.6V.
The LDO regulates a voltage for the internal device
logic while permitting the V
at a higher voltage. There is no user enable/disable
control available for the LDO, it is always active. The
PIC16LF1946/47 operates at a maximum V
and does not incorporate an LDO.
A device I/O pin may be configured as the LDO voltage
output, identified as the V
required, an external low-ESR capacitor may be con-
nected to the V
The VCAPEN bit of Configuration Word 2 determines
which pin is assigned as the V
TABLE 8-1:
TABLE 8-2:
 2010 Microchip Technology Inc.
CONFIG2
Legend:
Name
VCAPEN<1:0>
LOW DROPOUT (LDO)
VOLTAGE REGULATOR
— = unimplemented locations read as ‘0’. Shaded cells are not used by LDO.
00
11
Bits
13:8
7:0
CAP
VCAPEN<1:0> SELECT BITS
SUMMARY OF CONFIGURATION WORD WITH LDO
pin for additional regulator stability.
Bit -/7
—
—
DD
CAP
CAP
and I/O pins to operate
Bit -/6
pin. Refer to
—
—
pin. Although not
No Vcap
RF0
Pin
Bit 13/5
DD
LVP
Table
—
of 3.6V
8-1.
Preliminary
VCAPEN
Bit 12/4
DEBUG
On power-up, the external capacitor will load the LDO
voltage regulator. To prevent erroneous operation, the
device is held in Reset while a constant current source
charges the external capacitor. After the cap is fully
charged, the device is released from Reset. For more
information on recommended capacitor values and the
constant current rate, refer to the LDO Regulator
Characteristics Table in
Specifications”.
Bit 11/3
—
—
PIC16F/LF1946/47
Bit 10/2
BORV
—
STVREN
Bit 9/1
WRT1
Section 30.0 “Electrical
DS41414B-page 103
PLLEN
Bit 8/0
WRT0
Register
on Page
58