PIC18F65J15-I/PT Microchip Technology, PIC18F65J15-I/PT Datasheet - Page 107

• Manufacturer Part Number: PIC18F65J15-I/PT
• Description: IC PIC MCU FLASH 24KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J15-I/PT

• Core Size: 8-Bit
• Program Memory Size: 48KB (24K x 16)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 50
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 50
• Ram Memory Size: 2048Byte
• Cpu Speed: 40MHz
• No. Of Timers: 5
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

8.8
In alternate power-managed Run modes, the external
bus continues to operate normally. If a clock source
with a lower speed is selected, bus operations will run
at that speed. In these cases, excessive access times
for the external memory may result if wait states have
been enabled and added to external memory opera-
tions. If operations in a lower power Run mode are
anticipated, users should provide in their applications
for adjusting memory access times at the lower clock
speeds.
© 2009 Microchip Technology Inc.
Operation in Power-Managed
Modes
PIC18F87J10 FAMILY
In Sleep and Idle modes, the microcontroller core does
not need to access data; bus operations are
suspended. The state of the external bus is frozen, with
the address/data pins and most of the control pins hold-
ing at the same state they were in when the mode was
invoked. The only potential changes are the CE, LB
and UB pins, which are held at logic high.
DS39663F-page 105