PIC18F65J15-I/PT Microchip Technology, PIC18F65J15-I/PT Datasheet - Page 146

• Manufacturer Part Number: PIC18F65J15-I/PT
• Description: IC PIC MCU FLASH 24KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J15-I/PT

• Core Size: 8-Bit
• Program Memory Size: 48KB (24K x 16)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 50
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 50
• Ram Memory Size: 2048Byte
• Cpu Speed: 40MHz
• No. Of Timers: 5
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, I2C, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 50
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 1 mm
• Length: 10 mm
• Supply Voltage (max): 2.7 V, 3.6 V
• Supply Voltage (min): 2 V, 2.7 V
• Width: 10 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180015 - MODULE PLUG-IN 18F87J10 FOR HPCAC162062 - HEADER INTRFC MPLAB ICD2 64/80PAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F87J10 FAMILY
11.9
PORTH is an 8-bit wide, bidirectional I/O port. The cor-
responding Data Direction register is TRISH. Setting a
TRISH bit (= 1) will make the corresponding PORTH
pin an input (i.e., put the corresponding output driver in
a high-impedance mode). Clearing a TRISH bit (= 0)
will make the corresponding PORTH pin an output (i.e.,
put the contents of the output latch on the selected pin).
PORTH<3:0> pins are digital only and tolerate voltages
up to 5.5V.
The Output Latch register (LATH) is also memory
mapped. Read-modify-write operations on the LATH
register read and write the latched output value for
PORTH.
All pins on PORTH are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
DS39663F-page 144
Note:
PORTH, LATH and
TRISH Registers
PORTH is available only on 80-pin
devices.
When the external memory interface is enabled, four of
the PORTH pins function as the high-order address
lines for the interface. The address output from the
interface takes priority over other digital I/O. The
corresponding TRISH bits are also overridden.
PORTH pins, RH4 through RH7, are multiplexed with
analog converter inputs. The operation of these pins as
analog inputs is selected by clearing or setting the
PCFG<3:0> control bits in the ADCON1 register.
PORTH can also be configured as the alternate
Enhanced PWM output Channels B and C for the
ECCP1 and ECCP3 modules. This is done by clearing
the ECCPMX Configuration bit.
EXAMPLE 11-8:
CLRF
CLRF
MOVLW
MOVWF
MOVLW
MOVWF
PORTH
LATH
0Fh
ADCON1
0CFh
TRISH
INITIALIZING PORTH
© 2009 Microchip Technology Inc.
; Initialize PORTH by
; clearing output
; data latches
; Alternate method
; to clear output
; data latches
; Configure PORTH as
; digital I/O
; Value used to
; initialize data
; direction
; Set RH3:RH0 as inputs
; RH5:RH4 as outputs
; RH7:RH6 as inputs