PIC18F85J90-I/PT Microchip Technology, PIC18F85J90-I/PT Datasheet - Page 24

• Manufacturer Part Number: PIC18F85J90-I/PT
• Description: IC PIC MCU FLASH 16KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F85J90-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 67
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm Channels: 2
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 67
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM163030
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 80TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

MCP3909/PIC18F85J90 Single Phase Energy Meter Reference Design
3.4.8
3.4.9
3.4.10
DS51884A-page 24
PHA_VAR_RAW (NOT IMPLEMENTED)
PHA_VAR (NOT IMPLEMENTED)
PERIOD
REGISTER 3-8:
This is the raw phase A reactive power. This is the register to be read during calibration
for calculating the gain values associated with reactive phase y power,
PHA_VAR_GAIN and PHA_VAR_GLSB. This register is overwritten every LINE_CYC
line cycles (written only once if calibration is enabled).
NOT IMPLEMENTED IN THIS FIRMWARE/SOFTWARE RELEASE.
REGISTER 3-9:
This is the value for phase A reactive power. The goal is to get this value to equal
X VAR/LSB. This is done with the PHA_VAR_GLSB registers. When displaying the
reactive power for phase A, simply display the value in these registers with the decimal
point one digit in from the right, in milli-volt-amperes-reactive. (Note this decimal point
location, or LSB resolution of 0.1 mVAR, is specific for the 5(10)A, 220V rating that this
meter is designed for). This register is overwritten every LINE_CYC line cycles (written
only once if calibration is enabled).
NOT IMPLEMENTED IN THIS FIRMWARE/SOFTWARE RELEASE.
REGISTER 3-10:
This 32-bit register represents the total number of clock ticks that elapsed over the most
recent LINE_CYC line cycles. Each LSB represents 1.6 us with a 40 MHz clock on the
microcontroller. This register is overwritten every LINE_CYC line cycles (written only
once if calibration is enabled).
PHA_VAR_RAW
PERIOD
Name
PHA_VAR
Name
Name
Bits
PHA_VAR_RAW REGISTER
PHA_VAR REGISTER
PERIOD REGISTER
32
Bits
Bits
48
32
Address
Address
Address
0x0C0
0x0A0
0x0B2
Cof
Cof
Cof
R
R
R
© 2009 Microchip Technology Inc.