DSPIC33FJ64GS610-E/PT Microchip Technology, DSPIC33FJ64GS610-E/PT Datasheet - Page 2

• Manufacturer Part Number: DSPIC33FJ64GS610-E/PT
• Description: MCU/DSP 16BIT 64KB FLASH 100TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64GS610-E/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 100-TFQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, QEI, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 9K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 24x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Numeric And Arithmetic Format: Fixed-Point or Floating-Point
• Instruction Set Architecture: Harvard
• Device Million Instructions Per Second: 40 MIPs
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 85
• Data Ram Size: 4 KB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• On-chip Dac: 10 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
TABLE 2:
DS80489C-page 2
Note 1:
Reserved
Interrupts
Module
ECAN
Speed
ECAN
JTAG
PWM
PWM
PWM
ADC
High
SPI
Only those issues indicated in the last column apply to the current silicon revision.
Synchronization
Consumption in
Boundary Scan
External Period
Exit from Doze
Error Interrupt
PWM Module
Master Time
Sleep Mode
Reset Mode
Secondary
WAKIF bit
ASS1 Pin
(XPRES)
Mode on
Interrupt
Feature
SILICON ISSUE SUMMARY
Current
Enable
Base
Flag
—
Number
Item
10.
1.
2.
3.
4.
5.
6.
7.
8.
9.
The WAKIF bit in the CxINTF register cannot be
cleared by software instruction after the device is
interrupted from Sleep due to activity on the CAN
bus.
The ASS1 pin function does not work.
The boundary scan cells for the RD3 and RD13 pins
are swapped.
The external time base synchronization output pin,
SYNCO2, does not work.
An interrupt with a priority level lower than the CPU
priority level will trigger the dsPIC
exit the Doze mode, but an interrupt request will not
be generated.
If the ADC module is in an enabled state when the
device enters Sleep mode, the power-down current
(I
sheet specifications.
When using the External Period Reset mode, PWM
period will get reset immediately if the Reset signal
is active at the end of the PWM ON time.
A glitch may be observed on the PWM pins when
the PWM module is enabled after assignment of pin
ownership to the PWM module.
The ERRIF status bit does not get set when a CAN
error condition occurs.
PD
) of the device may exceed the device data
Issue Summary
—
®
DSC device to
© 2010 Microchip Technology Inc.
Affected Revisions
A0
—
X
X
X
X
X
X
X
X
X
(1)