ST7FLIT15BM6TR STMicroelectronics, ST7FLIT15BM6TR Datasheet - Page 86

• Manufacturer Part Number: ST7FLIT15BM6TR
• Description: IC MCU 8BIT 2K FLASH SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLIT15BM6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: ST7FLIT1x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Package / Case: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

ST7LITE1xB
SERIAL PERIPHERAL INTERFACE (cont’d)
11.4.3.1 Functional Description
A basic example of interconnections between a
single master and a single slave is illustrated in
Figure
The MOSI pins are connected together and the
MISO pins are connected together. In this way
data is transferred serially between master and
slave (most significant bit first).
The communication is always initiated by the mas-
ter. When the master device transmits data to a
slave device via MOSI pin, the slave device re-
sponds by sending data to the master device via
Figure 54. Single Master/ Single Slave Application
86/159
1
2.
MSBit
GENERATOR
8-bit SHIFT REGISTER
CLOCK
SPI
MASTER
LSBit
MOSI
SCK
SS
MISO
+5V
the MISO pin. This implies full duplex communica-
tion with both data out and data in synchronized
with the same clock signal (which is provided by
the master device via the SCK pin).
To use a single data line, the MISO and MOSI pins
must be connected at each node (in this case only
simplex communication is possible).
Four possible data/clock timing relationships may
be chosen (see
and slave must be programmed with the same tim-
ing mode.
MISO
MOSI
SCK
SS
Figure 5 on page
MSBit
Not used if SS is managed
by software
8-bit SHIFT REGISTER
SLAVE
7) but master
LSBit