ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 161

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 108. PWMART_OCMP_Mode
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Input Parameter 3
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
PWMART_OCMP_Mode
Void PWMART_OCMP_Mode(Pwmart_Compare OC-
MP,Pwmart_Output POLARITY,unsigned char
Compare_Data)
Configures the timer in Output compare mode. You have
to call this function more than once to enable several out-
put compares.
PWMART_OCMP_O
where O can be 0, 1, 2, 0r 3.
O= 0, Output Compare register 0 value is compared with
O= 1, Output Compare register 1 value is compared with
O= 2, Output Compare register 2 value is compared with
O= 3, Output Compare register 3 value is compared with
PWMART_POLARITY_0
Output level is low, for Counter value > Compare_Data
Output level is high, for Counter value <= Compare_Data
PWMART_POLARITY_1
Output level is high, for Counter value > Compare_Data
Output level is low, for Counter value <= Compare_Data
Compare_Data
Data to be loaded in DCR register (0x00 to 0xFF).
None
PWMART_Counter_Enable must have been called
None
The output compare waveform is obtained on the corre-
sponding PWM pin.
None
counter value.
counter value.
counter value.
counter value.
Function Descriptions
161/235