Z8F0422SJ020EG Zilog, Z8F0422SJ020EG Datasheet - Page 82

• Manufacturer Part Number: Z8F0422SJ020EG
• Description: IC ENCORE MCU FLASH 4K 28SOIC
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F0422SJ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: Z8F042xx
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4142; Z8F0422SJ020EG

Timers
Architecture
Operation
PS022517-0508
Z8 Encore! XP
be used for timing, event counting, or generation of pulse-width modulated signals. The
timer features include:
•
•
•
•
•
•
•
In addition to the timers described in this chapter, the Baud Rate Generators for any
unused UART, SPI, or I
functionality. See the respective serial communication peripheral chapters for
information on using the Baud Rate Generators as timers.
Figure 10
The timers are 16-bit up-counters. Minimum time-out delay is set by loading the value
0001H
to 1. Maximum time-out delay is set by loading the value
High and Low Byte registers and setting the prescale value to 128. If the Timer reaches
FFFFH
16-bit reload counter.
Programmable prescaler with prescale values from 1 to 128.
PWM output generation.
Capture and compare capability.
External input pin for timer input, clock gating, or capture signal. External input pin
signal frequency is limited to a maximum of one-fourth the system clock frequency.
Timer output pin.
Timer interrupt.
, the timer rolls over to
into the Timer Reload High and Low Byte registers and setting the prescale value
displays the architecture of the timers.
®
F0822 Series products contain up to two 16-bit reloadable timers that can
2
C peripherals can also be used to provide basic timing
0000H
and continues counting.
Z8 Encore! XP
0000H
Product Specification
into the Timer Reload
®
F0822 Series
Timers
69