MC9S08QD2MSCR Freescale Semiconductor, MC9S08QD2MSCR Datasheet - Page 115

• Manufacturer Part Number: MC9S08QD2MSCR
• Description: IC MCU 8BIT 8-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08QD2MSCR

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 16MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 4
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC (3.9mm Width)
• Processor Series: S08QD
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08QD4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

8.6
This section contains information for using the ADC module in applications. The ADC has been designed
to be integrated into a microcontroller for use in embedded control applications requiring an A/D
converter.
8.6.1
The following sections discuss the external pins associated with the ADC module and how they must be
used for best results.
8.6.1.1
The ADC module has analog power and ground supplies (V
separate pins on some devices. On other devices, V
and on others, both V
are separate pads for the analog supplies which are bonded to the same pin as the corresponding digital
supply so that some degree of isolation between the supplies is maintained.
When available on a separate pin, both V
as their corresponding MCU digital supply (V
noise immunity and bypass capacitors placed as near as possible to the package.
Freescale Semiconductor
Application Information
External Pins and Routing
Analog Supply Pins
SSAD
and V
Figure 8-14. Initialization Flowchart for Example
DDAD
MC9S08QD4 Series MCU Data Sheet, Rev. 6
are shared with the MCU digital supply pins. In these cases, there
DDAD
CLEAR COCO BIT
THEN ADCRL TO
INITIALIZE ADC
ADCCFG = $98
ADCSC2 = $00
ADCSC1 = $41
READ ADCRH
CONTINUE
COCO=1?
DD
and V
CHECK
RESET
and V
SSAD
YES
SSAD
SS
is shared on the same pin as the MCU digital V
must be connected to the same voltage potential
) and must be routed carefully for maximum
NO
DDAD
and V
Analog-to-Digital Converter (S08ADC10V1)
SSAD
) which are available as
SS
115
,