R5F212G4SNFP#U0 Renesas Electronics America, R5F212G4SNFP#U0 Datasheet - Page 12

• Manufacturer Part Number: R5F212G4SNFP#U0
• Description: IC R8C/2G MCU FLASH 32LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/2Gr

Specifications of R5F212G4SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 8MHz
• Connectivity: LIN, SIO, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

R8C/2G Group
Rev.1.00
REJ03B0223-0100
2.8.7
2.8.8
2.8.9
2.8.10
The I flag enables maskable interrupts.
Interrupt are disabled when the I flag is set to 0, and are enabled when the I flag is set to 1. The I flag is set to 0
when an interrupt request is acknowledged.
ISP is selected when the U flag is set to 0; USP is selected when the U flag is set to 1.
The U flag is set to 0 when a hardware interrupt request is acknowledged or the INT instruction of software
interrupt numbers 0 to 31 is executed.
IPL is 3 bits wide and assigns processor interrupt priority levels from level 0 to level 7.
If a requested interrupt has higher priority than IPL, the interrupt is enabled.
If necessary, set to 0. When read, the content is undefined.
Apr 04, 2008
Interrupt Enable Flag (I)
Stack Pointer Select Flag (U)
Processor Interrupt Priority Level (IPL)
Reserved Bit
Page 10 of 41
2. Central Processing Unit (CPU)