DSPIC30F5015T-20I/PT Microchip Technology, DSPIC30F5015T-20I/PT Datasheet - Page 16

• Manufacturer Part Number: DSPIC30F5015T-20I/PT
• Description: IC DSPIC MCU/DSP 66K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5015T-20I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• For Use With: AC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC30F Family Reference Manual
28. Page 15-32, Section 15.10.1 Fault Pin
29. Page 17-9, Register 17-4 ADCHS
30. Page 17-14, Section 17.7 Selecting the
31. Page 17-37, Table 17-5 Converting Three
DS80169E-page 16
On page 15-32, Section 15.10.1 Fault Pin Enable
Bits, paragraph 2 should be replaced with the
following:
On page 17-9, Section 17-4 ADCHS, the following
note should be added to the ADCHS register
description:
On page 17-14, Section 17.7 Selecting the A/D
Conversion Clock, paragraph 3 should be
replaced with the following:
Also remove Table 17-1: Typical T
Operating Frequencies.
On page 17-37, Table 17-5 Converting Three
Inputs, Four Times and Four Inputs, One Timer
Per Interrupt, the initialization of the SMPI <3:0>
(ADCON2<5:2>) bits should be modified as
follows:
SMPI<3:0> = 0011
Enable Bits
A/D Conversion Clock
Inputs, Four Times and Four Inputs, One
time Per Interrupt
If all enable bits are cleared in the FLTACON or FLTBCON registers, then that fault input pin has
no effect on the PWM module and no fault interrupts will be produced.
For correct A/D conversions, the A/D conversion clock (T
minimum T
Note:
AD
The ADCHS register description and functionality will vary depending on the number
of A/D inputs available on the selected device. Please refer to the specific device
datasheet for additional details on this register.
time of 154 nsec (for V
AD
vs. Device
DD
= 5V).
AD
) must be selected to ensure a
 2004 Microchip Technology Inc.