SAF-XC164GM-8F40F AA Infineon Technologies, SAF-XC164GM-8F40F AA Datasheet - Page 62

• Manufacturer Part Number: SAF-XC164GM-8F40F AA
• Description: IC MCU 16BIT 64KB FLASH TQFP64-8
• Manufacturer: Infineon Technologies
• Series: XC16xr

Specifications of SAF-XC164GM-8F40F AA

• Core Processor: C166SV2
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SPI, UART/USART
• Peripherals: PWM, WDT
• Number Of I /o: 47
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.7 V
• Data Converters: A/D 14x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LFQFP
• Packages: PG-LQFP-64
• Max Clock Frequency: 40.0 MHz
• Sram (incl. Cache): 6.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 14
• Program Memory: 64.0 KByte
• For Use With: MCBX167-NET - BOARD EVAL INFINEON CAN/ETHRNTMCBXC167-BASIC - BOARD EVAL BASIC INFINEON XC16X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: SAF-XC164GM-8F40FAACT; SAF-XC164GM-8F40FAACT; SAF-XC164GM-8F40FAAINCT

This is especially important for bus cycles using waitstates and e.g. for the operation of
timers, serial interfaces, etc. For all slower operations and longer periods (e.g. pulse train
generation or measurement, lower baudrates, etc.) the deviation caused by the PLL jitter
is negligible.
The value of the accumulated PLL jitter depends on the number of consecutive VCO
output cycles within the respective timeframe. The VCO output clock is divided by the
output prescaler (K = PLLODIV+1) to generate the master clock signal
the number of VCO cycles can be represented as K × N, where N is the number of
consecutive
For a period of N × TCM the accumulated PLL jitter is defined by the deviation D
D
So, for a period of 3 TCMs @ 20 MHz and K = 12: D
This formula is applicable for K × N < 95. For longer periods the K × N = 95 value can be
used. This steady value can be approximated by: D
Figure 15
Note: The bold lines indicate the minimum accumulated jitter which can be achieved by
Data Sheet
N
[ns] = ±(1.5 + 6.32 × N /
selecting the maximum possible output prescaler factor K.
Acc. jitter
±8
±7
±6
±5
±4
±3
±2
±1
ns
f
0
MC
Approximated Accumulated PLL Jitter
0
cycles (TCM).
1
10 MHz
40 MHz
D
N
K = 15
5
20 MHz
f
MC
K = 12
);
f
MC
K = 10
10
in [MHz], N = number of consecutive TCMs.
K = 8
60
K = 6 K = 5
15
3
Nmax
= ±(1.5 + 6.32 × 3 / 20) = 2.448 ns.
[ns] = ±(1.5 + 600 / (K ×
20
Electrical Parameters
25
MCD05566
f
MC
Derivatives
V1.2, 2007-03
XC164GM
. Therefore,
N
N
f
MC
:
)).