TLE4263G Infineon Technologies, TLE4263G Datasheet - Page 19

• Manufacturer Part Number: TLE4263G
• Description: IC REG LDO 5V 250MA DSO-20
• Manufacturer: Infineon Technologies

Specifications of TLE4263G

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: Up to 45V
• Voltage - Dropout (typical): 0.35V @ 150mA
• Number Of Regulators: 1
• Current - Output: 250mA
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-20
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 45 V
• Output Voltage: 5 V
• Output Type: Fixed
• Dropout Voltage (max): 0.5 V at 150 mA
• Output Current: 400 mA
• Line Regulation: 25 mV
• Load Regulation: 25 mV
• Voltage Regulation Accuracy: 2 %
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: SP000011762; SP000300935; TLE4263G; TLE4263GTR

Edition 2007-03-20
Published by
Infineon Technologies AG
81726 Munich, Germany
©
2007 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.