TLE4266G Infineon Technologies, TLE4266G Datasheet - Page 13

• Manufacturer Part Number: TLE4266G
• Description: IC REGULATOR LDO 5V SOT-223
• Manufacturer: Infineon Technologies

Specifications of TLE4266G

• Package / Case: SOT-223 (3 leads + Tab), SC-73, TO-261
• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: 10.5 ~ 45 V
• Voltage - Dropout (typical): 0.25V @ 100mA
• Number Of Regulators: 1
• Current - Output: 100mA (Max)
• Current - Limit (min): 120mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 45 V
• Output Voltage: 5 V
• Output Type: Fixed
• Dropout Voltage (max): 0.5 V at 100 mA
• Output Current: 120 mA
• Line Regulation: 30 mV
• Load Regulation: 40 mV
• Voltage Regulation Accuracy: 2 %
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: SP000011768; TLE4266GT

Edition 2004-01-01
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
©
Infineon Technologies AG 2004.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.