MT5600BA-V92-NAM Multi-Tech Systems, MT5600BA-V92-NAM Datasheet - Page 23

• Manufacturer Part Number: MT5600BA-V92-NAM
• Description: MODEM V.92 WORLD DATA/FAX LEASE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® IIr

Specifications of MT5600BA-V92-NAM

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9 V ~ 12 V
• Mounting Type: Desktop
• Package / Case: 9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1018

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Basic Options
The following LCDs are used to configure the modem’s basic operating conditions.
ONLINE OPTIONS
The following LCDs are used to configure the online operation of the modem:
DIALING OPTIONS
The following LCDs are used to configure dialing options or to dial manually.
LINE TYPE OPTIONS
Use the
(PSTN), two-wire leased line originate or answer, and four-wire leased line
originate or answer.
ERROR CORRECTION OPTIONS
Use the
automatic error correction. Same as the &E0, &E1, and &E2 commands.
FLOW CONTROL OPTIONS
Use the
software flow control. Same as the &E3, &E4, and &E5 commands.
TONE/PULSE
Use the
dialing. Same as the T and P commands.
BLIND/SMART DIAL OPTIONS
Use the
the OK, CONNECT, RING, NO CARRIER, ERROR and NO ANSWER messages
to the computer and does not look for a dial tone or busy signal, or smart dialing,
in which the modem sends all messages to the computer, including NO
DIALTONE and BUSY. Same as the X0 and X4 commands.
DIAL NUMBER
Use the front panel buttons to enter a phone number and dial it. To scroll through
a list of digits and characters, press the ↑
position, press the
button several times. To dial the number, press the Enter button. Same as the D
command.
DTR DIALING
Use the
popular in synchronous applications. In DTR dialing, the modem automatically
dials the number stored in memory location 0 when it detects a high DTR (Data
Terminal Ready) signal on the RS-232 interface. The DTR signal must remain
high for the duration of the call. To store the DTR dialing number, use the &Z0=
command or the ENTER PHONE #0 menu option.
Note:
during Plug and Play, and DTR dialing interferes with it.
Plug and Play does not function if DTR dialing is enabled. DTR is used
and Enter buttons to select from the following line types: dial-up
and Enter buttons to turn error correction on or off, or to select
and Enter buttons to select no flow control, hardware flow control, or
and Enter buttons to select between DTMF tone dialing and pulse
and Enter buttons to select blind dialing, in which the modem sends
and Enter buttons to enable or disable DTR dialing. DTR dialing is
button. To back up or to exit without dialing, press the
and ↓ buttons. To go to the next
Chapter 3 – Using the Front Panel
23