SD8XA-004G-000000 SanDisk, SD8XA-004G-000000 Datasheet - Page 46

• Manufacturer Part Number: SD8XA-004G-000000
• Description: SSD ULTRA320 SCSI 4GB
• Manufacturer: SanDisk
• Series: Ultra320r

Specifications of SD8XA-004G-000000

• Memory Size: 4GB
• Memory Type: FLASH
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD35-U3S-4-X-P80-P; FFD35-U3S-4-X-P80-P

11. C
This section provides you with the information you need to properly install your new SSD.
SanDisk recommends that qualified and trained personnel install the drive.
The following chapters contain handling information, mounting considerations, address and
configuration setups, cabling and connector information and information about obtaining
technical assistance and service.
Remember - Always back up your data before adding disk drives to your system!
11.1. Package Contents
Ensure that your kit contains the following items:


If any items are missing from your package, please contact your dealer.
11.2. Visual Inspection
Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions,
including personnel and equipment grounding. Before installing the SSD in your system, verify
the following:




11.3. Handling Instructions
You can prolong the life of your SSD, increase its reliability and prevent unnecessary damage by
following the instructions listed below. Failure to follow any of these instructions may void your
warranty.




46
SSD Ultra320 SCSI 3.5” flash disk unit
Screw kit, part no. 45-PK-005-00, containing four NC 6/32 mounting screws
If the shipping container appears to be damaged or water stained, notify your dealer.
Remove the disk from its shipping enclosure and inspect it for any damage that may have
occurred during shipment. If any damage is observed, notify your dealer.
Record the disk serial number and shipment date.
Retain the original shipping enclosure and all packing material for reshipment.
Always take all proper ESD precautions, including personnel and equipment grounding.
Always operate the SSD within the environmental specifications.
Always use a grounded wrist strap when handling the SSD. Drives that are not installed in
the system are sensitive to ESD damage.
Never switch DC power to the drive by plugging an electrically live source cable into the
drive‟s power connector.
ONFIGURING AND
Product Specification and User Manual
I
NSTALLING THE
SSD 3.5” U
SSD (Formerly FFD) Ultra320 SCSI 3.5"
LTRA
43-PS-0305-00 Rev. 2.2
320 SCSI