RR1220P-104-B-T5 Susumu, RR1220P-104-B-T5 Datasheet - Page 8

• Manufacturer Part Number: RR1220P-104-B-T5
• Description: RES 100K OHM 1/10W .1% 0805 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR1220P-104-B-T5

• Resistance (ohms): 100K
• Power (watts): 0.1W, 1/10W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.1%
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0805 (2012 Metric)
• Resistance In Ohms: 100K
• Case: 0805 (2012 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: RR1220P-104-B; RR1220P104B; RR12P100KBTR

TITLE:
6.3 Endurance
6.3.1 Rapid change of temperature
6.3.2 Endurance (Damp heat with load)
6.3.3 Endurance (rated load)
Method;
Specification;
Method;
Specification;
Method;
Specification;
The resistor shall be subjected to 5 continuous cycles, each as shown in the figure below.
For other procedures, refer to IEC 60115-1, Sub-clause 4.19.
Change in resistance
Without mechanical damage such as breaks and distinct damage in appearance.
Marking shall be legible.
The specimen shall be placed in the test chamber at a temperature 40±2deg C and a relative humidity
90 to 95 %, and then subjected to a voltage cycle consisting of rated d.c. voltage application of 1 hr 30
min and rest of 30 min repeatedly for 1000 +48/0 hrs.
However the applied voltage shall not exceed the limited element voltage.
For other procedures, refer to IEC 60115-1, Sub-clause 4.24.
Change in resistance
Without mechanical damage such as breaks and distinct damage in appearance.
Marking shall be legible.
The specimen shall be placed in the test chamber at 70±2deg C, and then subjected to a voltage cycle
consisting of rated d.c. voltage application of 1 hr 30 min and rest of 30 min repeatedly for 1000 +48/0
hrs.
However the applied voltage shall not exceed the limited element voltage.
For other procedures, refer to IEC 60115-1, Sub-clause 4.25.
Change in resistance
Without mechanical damage such as breaks and distinct damage in appearance.
Marking shall be legible.
Chip resistor RR1220 series
１ Minimum operating temperature±３deg C
２ Standard atmospheric conditions
３ Maximum operating temperature±２deg C
４ Standard atmospheric conditions
Specification for
:
:
:
±(0.5%+0.05Ω)
±(0.5%+0.05Ω)
±(0.5%+0.05Ω)
SUSUMU
CO.,LTD
SPEC.NO:
2∼3 min
2∼3 min
30 min
30 min
RR00-1097
Rev. No.
0
8/14