EA-XPR-001 Embedded Artists, EA-XPR-001 Datasheet - Page 22

• Manufacturer Part Number: EA-XPR-001
• Description: BOARD LPCXPRESSO LPC1343
• Manufacturer: Embedded Artists
• Series: LPCXpressor
• Type: MCUr

Specifications of EA-XPR-001

• Contents: Board, Software
• For Use With/related Products: EA-XPR-021, ARM Cortex-M3
• For Use With: EA-XPR-021 - BOARD BASE LPCXPRESSO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
LPC1311_13_42_43
Product data sheet
7.16.1 Features
7.17.1 Integrated oscillators
7.15 System tick timer
7.16 Watchdog timer
7.17 Clocking and power control
The ARM Cortex-M3 includes a system tick timer (SYSTICK) that is intended to generate
a dedicated SYSTICK exception at a fixed time interval, normally set to 10 ms.
The purpose of the watchdog is to reset the microcontroller within a selectable time
period. When enabled, the watchdog will generate a system reset if the user program fails
to ‘feed’ (or reload) the watchdog within a predetermined amount of time.
The LPC1311/13/42/43 include three independent oscillators. These are the system
oscillator, the Internal RC oscillator (IRC), and the watchdog oscillator. Each oscillator can
be used for more than one purpose as required in a particular application.
•
•
•
•
•
•
•
•
•
•
Four match registers per timer that allow:
– Continuous operation with optional interrupt generation on match.
– Stop timer on match with optional interrupt generation.
– Reset timer on match with optional interrupt generation.
Up to four external outputs corresponding to match registers, with the following
capabilities:
– Set LOW on match.
– Set HIGH on match.
– Toggle on match.
– Do nothing on match.
Internally resets chip if not periodically reloaded.
Debug mode.
Enabled by software but requires a hardware reset or a watchdog reset/interrupt to be
disabled.
Incorrect/incomplete feed sequence causes reset/interrupt if enabled.
Flag to indicate watchdog reset.
Programmable 32-bit timer with internal prescaler.
Selectable time period from (T
multiples of T
The Watchdog Clock (WDCLK) source can be selected from the Internal RC oscillator
(IRC), the watchdog oscillator, or the main clock. This gives a wide range of potential
timing choices of watchdog operation under different power reduction conditions. It
also provides the ability to run the WDT from an entirely internal source that is not
dependent on an external crystal and its associated components and wiring for
increased reliability.
All information provided in this document is subject to legal disclaimers.
cy(WDCLK)
Rev. 3 — 10 August 2010
× 4.
cy(WDCLK)
× 256 × 4) to (T
32-bit ARM Cortex-M3 microcontroller
LPC1311/13/42/43
cy(WDCLK)
× 2
© NXP B.V. 2010. All rights reserved.
32
× 4) in
22 of 62