UPC2756TB-EVAL CEL, UPC2756TB-EVAL Datasheet - Page 16

• Manufacturer Part Number: UPC2756TB-EVAL
• Description: EVAL BOARD FOR UPC2756TB
• Manufacturer: CEL
• Type: Downconverterr

Specifications of UPC2756TB-EVAL

• Contents: Board
• Product: RFID Readers
• Dimensions: 50 mm x 50 mm x 1.6 mm
• For Use With/related Products: UPC2756TB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

NOTE ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as to minimize ground impedance (to prevent abnormal oscillation).
(3) Keep the track length between the ground pins as short as possible.
(4) Connect a bypass capacitor (example 1 000 pF) to the V
(5) To construct oscillator, tank circuit must be externally attached to pin 3 and pin 4.
RECOMMENDED SOLDERING CONDITIONS
conditions other than those recommended below, contact your NEC sales representative.
SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
14
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Soldering Method
This product should be soldered under the following recommended conditions.
Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
For details of recommended soldering conditions for surface mounting, refer to information document
Package peak temperature: 235°C or below
Time: 30 seconds or less (at 210°C)
Count: 3, Exposure limit: None
Package peak temperature: 215°C or below
Time: 40 seconds or less (at 200°C)
Count: 3, Exposure limit: None
Soldering bath temperature: 260°C or below
Time: 10 seconds or less
Count: 1, Exposure limit: None
Pin temperature: 300°C or below
Time: 3 seconds or less (per side of device)
Exposure limit: None
Note
Soldering Conditions
Data Sheet P12807EJ3V0DS
Note
Note
Note
CC
pin.
Recommended Condition Symbol
For soldering methods and
WS60-00-1
VP15-00-3
IR35-00-3
–
µ µ µ µ PC2756TB