DM163027-5 Microchip Technology, DM163027-5 Datasheet - Page 23

• Manufacturer Part Number: DM163027-5
• Description: KIT DEMO PICDEM Z MRF24J40
• Manufacturer: Microchip Technology
• Series: PICDEM™ Zr
• Type: 802.15.4r

Specifications of DM163027-5

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232
• For Use With/related Products: MRF24J40MA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

B.1
B.2
© 2008 Microchip Technology Inc.
Appendix B. MRF24J40MA PICDEM Z 2.4 GHz RF Board
INTRODUCTION
MRF24J40MA PICDEM Z 2.4 GHz RF BOARD
This appendix describes the MRF24J40MA Z 2.4 GHz RF Board. Topics covered in this
appendix include:
• MRF24J40MA PICDEM Z 2.4 GHz RF Board
• Schematic
• PCB Layout
• Bill of Materials
The MRF24J40MA PICDEM Z 2.4GHz RF Board (AC163028) is shown in Figure B-1.
It features the MRF24J40MA transceiver module. The MRF24J40MA is a fully FCC, IC
and ETSI certified module. It is designed to plug into the PICDEM Z Motherboard, or to
any application, using a 12-pin connector. The 12-pin connector is available from
Samtec P/N LST-106-07-F-D.
For more information about the MRF24J40 IC and module, refer to:
“MRF24J40 2.4 GHz IEEE 802.15.4 RF Transceiver Data Sheet” (DS39776)
“MRF24J40MA 2.4 GHz IEEE 802.15.4 RF Transceiver Module Data Sheet”
(DS70329)
Features of the PICDEM Z MRF24J40 2.4 GHz RF Board include:
1. MRF24J40MA Transceiver Module (U1): An IEEE 802.15.4 compliant trans-
2. Daughter Card Connector (P1): Connector P1 is a 12-pin connector used to con-
ceiver module.
nect to the PICDEM Z Motherboard or any application with a mating connector.
It supplies 3.3V power, 4-wire SPI, reset, wake and interrupt connections to the
MRF24J40MA. The pinout is shown in Figure B-2. The 12-pin connector is a
Samtec P/N LST-106-07-F-D.
DEMONSTRATION KIT
USER’S GUIDE
PICDEM
DS51524C-page 19
™
Z