ATAVRRZ600 Atmel, ATAVRRZ600 Datasheet - Page 14

• Manufacturer Part Number: ATAVRRZ600
• Description: AVR TXRX EVAL KIT
• Manufacturer: Atmel
• Series: AVR®r
• Type: Transceiver, Microcontrollerr

Specifications of ATAVRRZ600

• Design Resources: RZ600 Radio Schematics RZ600 USB Adapter Schematics
• Frequency: 700MHz, 800MHz, 900MHz, 2.4GHz
• Wireless Frequency: 700 MHz to 2.4 GHz
• Interface Type: USB
• Antenna: SMA
• For Use With/related Products: AT86RF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATRZ600; ATRZ600

7 Getting Started
7.1 Kit Unpacking
7.2 USB Enumeration
Path
/TAL/AT86RF230B/Src
/TAL/AT86RF231/Inc
/TAL/AT86RF231/Src
/Resources
/Resources/Buffer_Management/Inc
/Resources/Buffer_Management/Src
/Resources/Queue_Management/Inc
/Resources/Queue_Management/Src
14
AVR600
This chapter describes how to get started with the RZ600 kit and run the demo
application in the most efficient way. Read section for section sequentially and follow
the directions carefully. The quick start guide assumes that the requirements in
section 3.2 are fulfilled.
1. Open the box and verify that all items are present as outlined in section 3.1.
2. Locate the two processor boards and select a pair of radio transceivers to test –
3. Mount the radio frequency board onto the processor boards 10-pin connector.
4. Attach any of the auxiliary signals between the two units using the single wires.
1. Connect one of the board assemblies to you PC and let it start USB enumeration
2. The first time this is done, the CDC driver will have to be installed. A “Found new
3. Select “Install from a list or specific location (Advanced). Click next. Select “Include
4. Click finish.
5. Verify what COM port that was assigned to the USB device. This can be done from
6. Repeat step 1 to 5 for the second board assembly.
they should be of the same type.
Make sure that pin 1 on both boards aligns.
process.
hardware wizard” will pop up. Select “No, not this time” and next.
this
/PAL/AVR32/UC3A3256/Boards
the Control Panel under the start menu. Select Administrative Tools from the menu
and then click the Computer Management. Now click on the Computer
Management item – and look under the Ports (COM & LPT) from the list. A new
COM port should be available
location
File
in
the
search:”.
Select
the
following
Comment
Source files specific to th
AT86RF230 radio transc
Include files specific to t
AT86RF231 radio transc
Source files specific to th
AT86RF231 radio transc
Common resources use
layers
8293A-AVR-03/10
folder: