101-1285 Rabbit Semiconductor, 101-1285 Datasheet - Page 20

• Manufacturer Part Number: 101-1285
• Description: DEV KIT DELUXE MINICORE RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1285

• Frequency: 2.4GHz
• Processor To Be Evaluated: Rabbit 5000
• Processor Series: RCM5600W
• Interface Type: RS-232, USB, PCI
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 30 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1161

2.2.3 Step 3 — Connect Antenna
Install the antenna U.FL to RP-SMA connector cable in the bracket using two lockwashers
and the nut as shown in the insert in Figure 4. Connect the wire to connector P1 on the
RCM5600W, then attach the antenna to the antenna RP-SMA connector.
Alternate Antenna Connector Cable Installation
2.2.4 Step 4 — Connect USB Cable
The USB cable connects the RCM5600W to the PC running Dynamic C to download pro-
grams and to monitor the RCM5600W module during debugging. It also supplies power to
the Interface Board and the RCM5600W via the USB interface.
Connect the USB cable between USB connector J5 on the Interface Board and your PC as
shown in Figure 4. Note that the USB cable connectors are different at either end, so there
is only one way to connect them between the PC and the Interface Board.
14
If you prefer, you may solder the
RP-SMA antenna connector directly
to the Interface Board at P1 as shown
in the diagram at right. Before doing
so, make sure that you use a long
plastic standoff instead of the an-
tenna bracket. Then connect the wire
to connector P1 on the RCM5600W,
and attach the antenna to the antenna
RP-SMA connector.
Figure 4. Connect Antenna and USB Cable
MiniCore RCM5600W