EM260-USART-JMP-R Ember, EM260-USART-JMP-R Datasheet - Page 60

• Manufacturer Part Number: EM260-USART-JMP-R
• Description: KIT JUMP START FOR EM260
• Manufacturer: Ember
• Series: JumpStartr
• Type: 802.15.4/Zigbeer

Specifications of EM260-USART-JMP-R

• Frequency: 2.4GHz
• For Use With/related Products: EM260
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 636-1004; EM260-JMP

EM260
60
120-1003-000D
6.3.6
Name: channelCalibrated
Description: Tests whether the specified channel is calibrated.
Command Parameters:
int8u channel
Response Parameters:
EmberStatus status
Name: startChannelCalibration
Description: Start calibrating the specified channel. The calibration process takes several seconds to com-
plete and the EM260 will be unresponsive until it is complete. The Host must not send another command until
the EM260 indicates that calibration is complete, using the
Command Parameters:
int8u channel
Response Parameters:
EmberStatus status
Name: calibrationCompleteHandler
Description: Informs the Host that calibration is complete and reports the result of the calibration.
This frame is a response to the
Response Parameters:
int8u channel
EmberStatus status
Networking Frames
callback
command.
The channel number to test.
EMBER_SUCCESS. The Host must wait for the
ID: 0x4B
EMBER_SUCCESS if the channel is calibrated, EM-
BER_CHANNEL_NOT_CALIBRATED if the channel is not calibrated
and EMBER_PHY_INVALID_CHANNEL if the channel is not a valid
802.15.4 channel.
ID: 0x4C
The channel to be calibrated.
pleteHandler
ID: 0x4D
The channel that was calibrated.
EMBER_SUCCESS if the channel was calibrated successfully and
EMBER_PHY_INVALID_CHANNEL if the channel was not a valid
802.15.4 channel.
calibrationCompleteHandler
callback to report the result of the calibration.
calibrationCom-
callback.