101-1229 Rabbit Semiconductor, 101-1229 Datasheet - Page 68

• Manufacturer Part Number: 101-1229
• Description: KIT DEV RCM4400W INTL JAPAN ONLY
• Manufacturer: Rabbit Semiconductor
• Type: 802.11br

Specifications of 101-1229

• Frequency: 2.4GHz
• For Use With/related Products: RCM4400W
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined

•
•
62
ulations for the country where your system incorporating the RCM4400W will be
deployed for any other requirements. Any attempt to operate a device outside the
allowed channel range or power limits will void your regulatory approval to operate
the device in that country.
Before you compile and run this sample program, uncomment the
REGION_REQ
The Americas region will be used by default if one of these lines is not uncommented.
Now compile and run this sample program. The Dynamic C
play the region you selected.
The sample program also allows you to set up the TCP/IP configuration, and set the IP
address and SSID as shown in the sample code below.
REGION_MULTI_DOMAIN.C
access point can be used to configure your RCM4400W-based system to meet regional
regulations. The sample program includes pings to indicate that the RCM4400W-based
system has successfully received country information from your access point.
The country or region you select will automatically set the power and channel require-
ments to operate the RCM4400W module. Rabbit recommends that you check the reg-
ulations for the country where your system incorporating the RCM4400W will be
deployed for any other requirements.
Before you compile and run this sample program, verify that the access point has the
802.11d option enabled and is set for the correct region or country. Check the TCP/IP
configuration parameters, the IP address, and the SSID in the macros, which are repro-
duced below.
Now compile and run this sample program. The
macro will display the channel and power limit settings. The Dynamic C
dow will then display a menu that allows you to complete the configuration of the user
interface.
REGION_RUNTIME_PING.C
run time to configure your RCM4400W-based system to meet regional regulations. The
sample program also shows how to save and retrieve the region setting from nonvola-
tile memory. Once the region/country is set, this sample program sends pings using the
limits you set.
The country or region you select will automatically set the power and channel require-
ments to operate the RCM4400W module. Rabbit recommends that you check the reg-
ulations for the country where your system incorporating the RCM4400W will be
deployed for any other requirements.
#define TCPCONFIG 1
#define _PRIMARY_STATIC_IP "10.10.6.170"
#define _WIFI_SSID "olmtest"
#define TCPCONFIG 1
#define WIFI_REGION_VERBOSE
#define _PRIMARY_STATIC_IP "10.10.6.170"
#define _WIFI_SSID "deanap"
line corresponding to the region where your system will be deployed.
—demonstrates how the multi-domain options from the
—demonstrates how the region or country can be set at
#define WIFI_REGION_VERBOSE
STDIO
RabbitCore RCM4400W
#define _WIFI_
window will dis-
STDIO
win-