EKSFDCSWX Taiyo Yuden, EKSFDCSWX Datasheet - Page 20

• Manufacturer Part Number: EKSFDCSWX
• Description: KIT EVAL EYSFDCSWX BLUETOOTH
• Manufacturer: Taiyo Yuden
• Type: Transceiver, Bluetoothr

Specifications of EKSFDCSWX

• Frequency: 2.4GHz
• For Use With/related Products: EYSFDCSWX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 587-1428

Control No.
HD-AE-C051267
Notes:
EYSFDCSWX
a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
k)
l)
m)
n)
o)
p)
Some operations restricted or non-functional in a scatternet.
tely
20 per 15 seconds. The time limit can be configured.
Preliminary Support for SCO over USB or H4 is in place, but testing has been light.
No HCI SCO Host to Host Controller flow control support.
compatibility.
Up to seven connections: a slave of up to two masters, and/or a master of up to seven slave.
Chip resource limits constrain the rate at which ACL and SCO connections can be made and broken to approxima
Up to three SCO links. Each SCO link can be routed over the chip’s PCM interface or over HCI/BCSP.
No HCI SCO
Limited support for “best effort” and “guaranteed” Qos only.
Initial device name taken from PS Keys, and so is maintained through a reset/reboot.
HCI Reset does not work if the device is in local loopback mode.
Optional Paging schemes are not supported.
Remote ACL loopback sometimes deadlocks when the device’s flow control mechanisms assert to each other.
Bluetooth v1.1 specification command, deprecated in the v1.2 specification,or later; support retained for backwards
Bluetooth v1.1 specification command, renamed in the v1.2 specification,or later.
Command not in the Bluetooth v1.1 specification.
Underlying Flow_Specification functionality the same as for QoS_Setup.
Command which rewrites FROM in module
CVSD not available with 3EV3 or 3EV5 EDR packets.
HCI Setup Synchronous Connection command does not support HV1,HV2 and HV3 Packet Type. If you want to use
those Packet Types,please use HCI Add SCO connection command
Park Mode ---> Park State
Exit Park Mode ---> Exit Park State
Set Host Controller To Host Flow Control ---> Set Controller To Host Flow Control
Change Local Name ---> Write Local Name
Read SCO Flow Control Enable ---> Read Synchronous Flow Control Enable
Write SCO Flow Control Enable ---> Write Synchronous Flow Control Enable
Get Link Quality ---> Read Link Quality
Host Controller to Host flow control support.
(8/13)
TAIYO YUDEN
Control name
Electrical characteristics
.
TAIYO YUDEN Confidential
22-Feb.-2006 Ver.1.4
& Tentative
20/45