AT86RF231-ZFR Atmel, AT86RF231-ZFR Datasheet - Page 46

• Manufacturer Part Number: AT86RF231-ZFR
• Description: TXRX LOW POWER 2.4GHZ 32VQFN
• Manufacturer: Atmel

Specifications of AT86RF231-ZFR

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
• Applications: Industrial Monitoring and Control, Wireless Alarm and Security Systems
• Power - Output: -17dBm ~ 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.3mA
• Current - Transmitting: 14mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2405 MHz to 2480 MHz
• Interface Type: SPI
• Noise Figure: 6 dB
• Output Power: 20 dB
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 12.3 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: AT86RF231-ZFR; AT86RF231-ZFRTR

8111C–MCU Wireless–09/09
Bit
+0x02
Read/Write
Reset Value
7
R
0
TRAC_STATUS
Register 0x02 (TRX_STATE):
The radio transceiver states are controlled via register bits TRX_CMD, which receives the state
transition commands.
This register is used for Basic and Extended Operating Mode, refer to
Operating Mode” on page
• Bit [7:5] - TRAC_STATUS
Refer to
• Bit [4:0] - TRX_CMD
A write access to register bits TRX_CMD initiate a radio transceiver state transition towards the
new state as defined by the write access:
Table 7-4.
Notes:
Register Bit
TRX_CMD
6
R
0
1. FORCE_PLL_ON is not valid for states SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK
2. Extended Operating Mode only, refers to
Section 7.2.7 “Register Description - Control Registers” on page
states, as well as STATE_TRANSITION_IN_PROGRESS towards these states.
ters” on page
State Control Command, Register Bits TRX_CMD
5
R
0
68.
47.
R/W
4
0
0x04
0x16
0x19
Value
0x00
0x02
0x03
0x06
0x08
0x09
(1)
(2)
(2)
R/W
3
State Description
NOP
TX_START
FORCE_TRX_OFF
FORCE_PLL_ON
RX_ON
TRX_OFF (CLK Mode)
PLL_ON (TX_ON)
RX_AACK_ON
TX_ARET_ON
All other values are reserved and mapped to NOP
0
Section 7.2.7 “Register Description - Control Regis-
TRX_CMD
R/W
2
0
R/W
1
0
Section 7.2 “Extended
68.
AT86RF231
R/W
0
0
TRX_STATE
46