AT86RF211DAI-R Atmel, AT86RF211DAI-R Datasheet - Page 33

• Manufacturer Part Number: AT86RF211DAI-R
• Description: IC TXRX FR FSK 400-950MHZ 48-TQF
• Manufacturer: Atmel

Specifications of AT86RF211DAI-R

• Frequency: 400MHz ~ 950MHz
• Data Rate - Maximum: 100kbps
• Modulation Or Protocol: FSK
• Applications: ISM
• Power - Output: 7dBm ~ 12dBm
• Sensitivity: -107dBm
• Voltage - Supply: 2.4 V ~ 3.6 V
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP Exposed Pad, 48-eTQFP, 48-HTQFP, 48-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Memory Size: -
• Current - Transmitting: -
• Current - Receiving: -

Status Register
1942C–WIRE–06/02
In reception mode, only one frequency needs to be programmed. In transmission mode,
two different registers (F0 & F1), or (F2 & F3) must be programmed for “0” code and “1”
code transmission. The DATAMSG pin value actually selects the used register. The four
registers can also be set to define two channels, so that the AT86RF211 may switch
quickly from a channel to the other.
Example:
FCHANNEL = 868.3 MHz
IF1 = 10.7 MHz
Deviation = ± 4 kHz
Notes:
The STATUS register is used to read the status of internal functions (including the
wake-up function) or the output value of the internal ADC. This register can only be
read.
Table 10. Status Register Overview
Mode
RX
TX
Mode
RX
TX
Name
Name
nbit
nbit
1. In reception mode, one of the two frequencies (879 MHz or 857.6 MHz) can be cho-
2. Two frequencies are used to transmit data: 868.304 MHz for ”
sen, taking into account external parameters (for example, the noise that brings the
image frequency).
868.296 MHz for ”
bit 5 of CTRL1.
PLLL
30
FSK
Programmed Frequency
FCHANNEL ± IF1
FCHANNEL ± deviation
868.3 ± 10.7 = 879 MHz or 857.6 MHz programmed in F2
868.3 ± 0.004 = 868.304 MHz programmed in F1 when DATAMSG = “1”
and 868.296 MHz programmed in F0 when DATAMSG = “0”
MSGDATL
MRSSI
29-24
14-10
0
” transmission. The polarity of DATAMSG can be swapped using
MVCC
23-18
WAKEUP
17
MSGMRATE
AT86RF211
1
9-0
16
” transmission and
-
MSGERR
15
33