DM2200-434VM RFM, DM2200-434VM Datasheet - Page 2

• Manufacturer Part Number: DM2200-434VM
• Description: 433.92 MHZ, 10 MW MESH MODULE, S
• Manufacturer: RFM
• Series: DM2200r

Specifications of DM2200-434VM

• Frequency: 433.92MHz
• Data Rate - Maximum: 9.6kbps
• Modulation Or Protocol: OOK
• Applications: Wireless Mesh Networks
• Power - Output: 10dBm
• Voltage - Supply: 2.9 V ~ 3.6 V
• Current - Receiving: 6mA
• Current - Transmitting: 36mA
• Data Interface: Pads for Pins
• Antenna Connector: On-Board, Spring
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensitivity: -
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 583-1040

DM2200-434VM Theory of Operation
The major components of the DM2200-434VM
wireless sensor network module include the TR7000
ASH transceiver and the TI MSP430F148 micro-
controller. The TR8100 operates on 433.92 MHz, with
a nominal output power of 10 mW. The MSP430F148
can operate referenced to either a 32.768 kHz or
6 MHz crystal.
The MSP430F148 UART provides a serial interface
on connector J2. The microcontroller’s eight general-
purpose I/O pins, GP0 - GP7 are available on con-
nector J2, along with four auxiliary digital I/O pins,
CFG0 - CFG3 on J1. General-purpose I/O pin GP0 is
dedicated to measuring the value of the received
www.RFM.com E-mail: [e-mail]
©2008 by RF Monolithics, Inc.
Figure 1
signal strength indicator (RSSI) circuit and should
always be set as an analog input. Auxiliary digital I/O
pin CFG3 is always configured as a digital input to
provide a firmware reset function (logic high for normal
operation). GP1 through GP7 and CFG0 through
CFG2 can be configured as required by the applica-
tion. The three LEDs on the transceiver module
display RF communication activity.
DM2200-434VM operation is based on RFM’s
VersaMESH
data and command transfers through both the serial
interface and the RF channel. See the DM2200 Sys-
tem User’s Guide and the DM2200 Software User’s
Guide for further details.
TM
mesh network protocol, which supports
DM2200-434VM - 4/18/08
Page 2 of 6