SRI512-A3S/1GE STMicroelectronics, SRI512-A3S/1GE Datasheet - Page 8

• Manufacturer Part Number: SRI512-A3S/1GE
• Description: IC MEMORY 13.56MHZ EEPRM ADH ANT
• Manufacturer: STMicroelectronics
• Series: SRI512r

Specifications of SRI512-A3S/1GE

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443-B
• Package / Case: 38mm x 38mm
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5535-2

Signal description
2
2.1
8/50
The SRI512 contactless EEPROM can be randomly read and written in block mode (each
block containing 32 bits). The instruction set includes the following nine commands:
The SRI512 memory is organized in three areas, as described in
resettable OTP (one-time programmable) area in which bits can only be switched from 1 to
0. Using a special command, it is possible to erase all bits of this area to 1.
The second area provides two 32-bit binary counters that can only be decremented from
FFFF FFFFh to 0000 0000h, and gives a capacity of 4,294,967,296 units per counter.
The last area is the EEPROM memory. It is accessible by block of 32 bits and includes an
auto-erase cycle during each WRITE_BLOCK command.
Figure 2.
Signal description
AC1, AC0
The pads for the Antenna Coil. AC1 and AC0 must be directly bonded to the antenna.
READ_BLOCK
WRITE_BLOCK
INITIATE
PCALL16
SLOT_MARKER
SELECT
COMPLETION
RESET_TO_INVENTORY
GET_UID
Die floor plan
AC0
AC1
AI09055
Table
3. The first area is a
SRI512