81030 Desco, 81030 Datasheet - Page 5

• Manufacturer Part Number: 81030
• Description: FINISH FLOOR STATFREE 55GAL
• Manufacturer: Desco
• Series: Statfree®r

Specifications of 81030

• Cleaner, Treatment Type: AntiStatic Liquid, Finish
• Applications: Floors
• Lead Free Status / RoHS Status: Not applicable / Not applicable

TB-2045 Page 5 of 8
Figure 8. Spray buffing with Desco Statfree
Spray Buff
3. Lightly spray a small area with the Statfree
Dissipative Spray Buff. Treat a small area at a time.
4. Buff the sprayed area at 175-300 RPM using a red pad
or at 1000-1500 RPM using a white or beige pad. Buff area
until clean and glossy. All black marks and scuffs should
be removed. The area must be buffed while in a liquid state.
5. After high speed buffing, dry mop the entire area with an
untreated mop.
For additional usage information and a MSDS sheet on
Desco Statfree
Bulletin TB-2048.
Statfree
Statfree
that renews the unique protective properties and gloss of
Statfree
in time, effort and money. Static decay properties, surface
resistance characteristics and durability of the floor finish
can be extended dramatically. The Restorer extends
the re-coat cycle and significantly reduces the cost of
maintenance.
BURNISHING RESTORER SCHEDULE
Heavy to moderate traffic floors should be treated 2-4 times
per month. Light traffic floors should be treated once a
month or as needed.
Equipment needed:
• Push broom
• 1000-1500 RPM burnishing machine
• Statfree
(with a white or beige pad)
®
®
Burnishing Restorer is a ready to use formulation
Dissipative Floor Finish with less of an investment
®
®
Burnishing Restorer, item
Burnishing Restorer
®
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site:
Dissipative Spray Buff, ask for Technical
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
#81061
®
Dissipative
®
ready-to-use
Figure 9. Statfree
ready-to-use, 5 gallon container
1. Dry mop the coated area to remove loose dirt from
coated floor.
2. Use a clean untreated string mop to apply a thin coat of
restorer onto floor. Allow it to dry 20 to 40 minutes.
3. Burnish the coated area with a 1000 to 1500 RPM rotary
machine and a clean beige burnishing pad.
4. Dry mop the entire burnished area again.
For additional usage information and a MSDS sheet on
Desco Statfree
Bulletin TB-2049.
Statfree
Physical Properties
Base:
Description:
hazardous material as defined
915.4)
Abrasion Resistance:
Color:
Density:
Freeze/Thaw Stability:
pH:
Slip Resistance:
Solids:
Solvents:
Thermal Stability:
Viscosity:
Working Humidity:
*Underwriters Laboratory (UL) tested and classified as slip
resistance only. UL Classification Number SA6524.
®
Dissipative Floor Finish
®
Burnishing Restorer, ask for Technical
®
Burnishing Restorer, Item No. 81061,
Acrylic Polymer
Aqueous Acrylic Emulsion, Non
Exc. Crockmeter @ 50% RH
Light blue opaque, dries clear
8.42 lbs/gal
Exc. 3 Cycles @ -10°C
8.5 - 9.0
UL Classified*
18%
Water
Exc. 50°C/1 month
3.3 cps
Range 30-80% RH
Desco.com
© 2010 DESCO INDUSTRIES INC.
in (29 CFR
Employee Owned