81030 Desco, 81030 Datasheet - Page 6

• Manufacturer Part Number: 81030
• Description: FINISH FLOOR STATFREE 55GAL
• Manufacturer: Desco
• Series: Statfree®r

Specifications of 81030

• Cleaner, Treatment Type: AntiStatic Liquid, Finish
• Applications: Floors
• Lead Free Status / RoHS Status: Not applicable / Not applicable

TB-2045 Page 6 of 8
Electrical Properties
Surface Resistance:
Charge Generation:
Method 134-1979
Charge Decay:
Testing
It is recommended that applications of Statfree
Floor Finish be tested periodically to ensure that insulative
contaminants such as dirt and grime are not building up on
surface. For optimal performance the surface should be
regularly maintained and kept cleaned. Testing for either
point to point resistance (RTT) or point to ground resistance
(RTG) will indicate if the floor finish needs maintenance.
If the surface is clean, high resistance readings usually
indicate that the floor finish is becoming worn and is in
need of replenishing of solids. These solids are worn away
over time due to normal floor traffic. Hence, the high floor
traffic areas will need more frequent maintenance than low
traffic areas. Maintenance is typically required if resistance
measurements are above 10
Figure 10.
vERIFICATION TESTING
For quick and easy verification of surface resistance, Desco
recommends the use of our
For detailed information on the Pocket Megohmmeter ask
for Technical Bulletin TB-2083.
MEGOHMMETER TESTING
Desco recommends the ESD Association’s Standard 7.1
test procedure along with a megohmmeter for determining
both RTT and RTG measurements. The Desco 19780
Surface Resistance Test Kit will provide all the necessary
equipment to test in accordance with the above mentioned
ESD Association standard. For detailed information on
the Surface Resistance Test Kit ask for Technical Bulletin
TB-3014. ESD-S 7.1 is available from the ESD Association,
7902 Turin Rd., Suite 4, Rome, NY 13440-2069, (315)
339-6937, www.esda.org.
19635
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site:
Meg Pocket Megohmmeter
10E6 – 10E9 ohms per ESD-S7.1
Zero per AATCC Step Test
5000v - 0v in < 0.1 seconds
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
19635
10
ohms.
Pocket Megohmmeter.
®
Dissipative
Figure 11.
Limited Warranty
Desco expressly warrants that for a period of one (1)
year from the date of purchase, Desco Statfree
Dissipative Floor Care products will be free of defects in
material. Within the warranty period, the material will be
tested and replaced at Desco’s option, free of charge.
Call Customer Service at [phone] (Walnut, CA)
or [phone] (Canton, MA) for a Return Material
Authorization (RMA) and proper shipping instructions
and address. You should include a copy of your original
packing slip, invoice, or other proof of purchase date.
Warranty replacements will take approximately one week.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to
defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain,
clean or repair products.
Limit of Liability
In no event will Desco or any seller be responsible
or liable for any injury, loss or damage, direct or
consequential, arising out of the use of or the inability to
use the product. Before using, users shall determine the
suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection
therewith.
19780
set up to test resistance point to point
Desco.com
© 2010 DESCO INDUSTRIES INC.
®
Static
Employee Owned