B3SL-1002P Omron, B3SL-1002P Datasheet - Page 2

• Manufacturer Part Number: B3SL-1002P
• Description: SWITCH TACT 6MM SMD MOM 200GF
• Manufacturer: Omron
• Series: B3SLr

Specifications of B3SL-1002P

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.05A @ 12VDC
• Actuator Type: Standard
• Mounting Type: Surface Mount
• Orientation: Vertical
• Outline: 6.00mm x 6.00mm
• Illumination: Non-Illuminated
• Operating Force: 200gf
• Actuator: Flat Plunger
• Contact Current Rating: 50 mAmps
• Contact Form: SPST - NO
• Termination Style: SMD/SMT
• Body Size: 6.5 mm L x 6.2 mm W x 3.4 mm H
• Contact Rating: 50 mAmps
• Contact Configuration: SPST-NO
• Contact Voltage Dc Nom: 12V
• Contact Current Max: 50mA
• Actuation Type: Top
• Switch Terminals: SMD
• Circuitry: SPST-NO
• Operating Force Max: 200gf
• Rohs Compliant: Yes
• Actuator Height: 0.9mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: B3SL1002P; SW1064TR

Dimensions
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.2mm applies to all dimensions.
B3SL-1002P
B3SL-1022P
Precautions
■ Precautions for Correct Use
Storage
Storage Environment
To prevent degradation, such as discoloration of the terminals during
storage, do not store the Switch in locations that are subject to the
following conditions;
Storage condition
Store the Switches in the packaging box.
After the packaging box is opened, use the contents as quickly as
possible. When storing leftover parts, make sure that appropriate
measures are taken against humidity and corrosive gases.
Handling
Usage Environment
Before installing the Switch, make sure that the area of installation is
not subject to corrosive gases emitted from surrounding parts.
252
1. Do not use in areas subject to high temperatures, high humid-
ity, or toxic gases such as sulfuric gas (H
gas (NH
cause corrosive damage to the contacts and result in mal-
function.
• High temperature or humidity
• Corrosive gases
• Direct sunlight
Middle Stroke Tactile Switch
3
), nitric gas (HNO
5.1
3.4
2.5
2.5
6.5
0.1
6.5
0.1
3
), or chlorine gas (CI
2.5 dia.
2.5 dia.
6.2
6.2
7
7
2
S, SO
4
B3SL
4
±0.2
±0.2
2
), ammonia
2
). It can
6.5
6.5
0.7
0.7
Operation
• Do not repeatedly operate the Switch with excessive force.
• Be sure to set up the Switch so that the plunger will operate in a
Applying excessive pressure or applying additional force after the
plunger has stopped may deform the disk spring of the Switch,
resulting in malfunction. (Maximum force = 30N)
straight vertical line. If the plunger is pressed off-center or from an
angle it may cause deformation or damage to some parts. This may
result in deterioration of life expectancy or malfunction.
1.2
1.2
2. If there is silicon in the atmosphere, it may stop the contacts
from functioning properly. If silicon products, such as silicon
oil, silicon filler, or silicon wires, are used in the surrounding
area, install a contact protection circuit to prevent arching or
remove the silicon source. The Switch is not completely
sealed. The following situations may cause water to enter
inside the Switch, resulting in a malfunction due to contact
failure or corrosion.
• Using the Switch in an outdoor environment where it is
• Using the Switch in an underwater setting where it is sub-
exposed to water drops for an extended period of time
ject to strong water pressure.
(Top View)
(Top View)
8.5
PCB Pad
PCB Pad
3
8.5
3
3
3
5
5
Terminal Arrangement/
Terminal Arrangement/
Internal Connections
Internal Connections
4
2
4
2
(Top View)
(Top View)
3
1
3
1