B3SL-1002P Omron, B3SL-1002P Datasheet - Page 3

• Manufacturer Part Number: B3SL-1002P
• Description: SWITCH TACT 6MM SMD MOM 200GF
• Manufacturer: Omron
• Series: B3SLr

Specifications of B3SL-1002P

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.05A @ 12VDC
• Actuator Type: Standard
• Mounting Type: Surface Mount
• Orientation: Vertical
• Outline: 6.00mm x 6.00mm
• Illumination: Non-Illuminated
• Operating Force: 200gf
• Actuator: Flat Plunger
• Contact Current Rating: 50 mAmps
• Contact Form: SPST - NO
• Termination Style: SMD/SMT
• Body Size: 6.5 mm L x 6.2 mm W x 3.4 mm H
• Contact Rating: 50 mAmps
• Contact Configuration: SPST-NO
• Contact Voltage Dc Nom: 12V
• Contact Current Max: 50mA
• Actuation Type: Top
• Switch Terminals: SMD
• Circuitry: SPST-NO
• Operating Force Max: 200gf
• Rohs Compliant: Yes
• Actuator Height: 0.9mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: B3SL1002P; SW1064TR

Electrical Operation
Use the Switch within the rated voltage and current ranges, other-
wise the Switch may have a shortened life expectancy, radiate heat,
or burn out. This particularly applies to the instantaneous voltages
and currents when switching.
Soldering
Soldering Precautions
Reflow Soldering Conditions
Firmly attach a thermocouple to the surface of the terminals with sol-
der that has a high melting point and set the reflow oven so that the
peak temperature of the terminals is 260°C or less.
The following figure shows the temperature profile.
Manual Soldering
Washing
Standard Switches are not sealed, and cannot be washed.
Doing so will cause the washing agent, together with flux or dust
particles on the PCB, to enter the Switch, resulting in malfunction.
Applicable Printed Circuit Board
The Switch is designed for a 1.6-mm thick, single-side PCB.
Using PCBs with a different thickness or using double-sided,
through-hole PCBs may result in loose mounting, improper insertion,
or poor heat resistance in soldering. These effects will occur,
depending on the type of holes and patterns of the PCB. Therefore, it
is recommended that a verification test is conducted before use.
1. Before any kind of soldering, test to confirm that soldering can
2. Do not solder the Switch more than twice, including rectifica-
1. Soldering temperature: 350°C max. at the tip of the soldering
2. Soldering time: 3 s max. for a 1.6-mm thick, single-side PCB
Temperature
be performed properly. Otherwise the Switch may be
deformed by the soldering heat depending on the type of
PCB, pattern, or lands of the PCB.
tion soldering. Wait for at least five minutes between the first
and second soldering to allow the temperature to return to
normal. Continuous soldering may cause the casing to melt or
deteriorate the Switch characteristics.
iron
260 max.
(°C)
220
180
150
Preheating time
60 to 120
60 max.
Main
heating
time
Time (s)
RoHS Compliant
The "RoHS Compliant" designation indicates that the listed models
do not contain the six hazardous substances covered by the RoHS
Directive.
Reference:
The following standards are used to determine compliance for the six
substances.
Packaging Specifications
The packaging specifications for B3SL Switches in embossed taping
are given below.
B3SL-1002P
B3SL-1022P
Common Precautions
Be sure to read the precautions common to all Tactile Switches, con-
tained in the Technical User’s Guide, “Tactile Switches, Technical
Information” for correct use.
Standards
Package
Heat resistance
Reel (Material: PS)
Reel (Material: PS)
(22)
(22)
Middle Stroke Tactile Switch
Label
Label
Lead:
Mercury:
Cadmium:
Hexavalent chromium:
PBB:
PBDE:
Tape drawing
direction
Tape drawing
direction
13 dia.
13 dia.
380
dia.
380
dia.
Conforms to JIS.
2,000 Switches (B3SL-1002P)
1,400 Switches (B3SL-1022P)
60°C for 24 hours (without deformation)
±2
±2
1.5
1.5
+0.1
+0.1
Tape drawing direction
0
Tape drawing direction
0
dia.
dia.
2
2
4
4
±0.1
1,000 ppm max.
1,000 ppm max.
1,000 ppm max.
1,000 ppm max.
100 ppm max.
1,000 ppm max.
12
±0.1
12
±0.1
±0.1
B3SL
1.75
7.5
1.75
7.5
16
16
253
(3.7)
(5.3)